EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
⚡ OFFICIAL NTA ASSESSMENT GENERATOR & WORD (.DOCX) EXPORTER

Haloalkanes and Haloarenes · Practice Worksheet

JEE Main Chemistry · Curated Assessment Set Print directly or export as a beautifully formatted Microsoft Word document with embedded 180-DPI mathematical prompt clips and step-by-step derivations.

QUESTIONS: (25 available in pool)
✎ Take it online 🙈 Hide Solutions ⬇ Export .docx
EDUPROD JEE MAIN TEST SERIES · NTA PATTERN

Haloalkanes and Haloarenes · Practice Worksheet

JEE Main Chemistry · Curated Assessment Set · Assessment Code: JEE-101

Total Marks: 80
Marking: +4 / -1 (Sec A) · +4 / 0 (Sec B)
Candidate Name: __________________________
Roll No.: _____________________
Date: __________________
QUESTION 1 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Question 1
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: 1 Step-by-Step Derivation
Derivation
QUESTION 2 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Question 2
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: 4 Step-by-Step Derivation
Derivation
QUESTION 3 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
The Hofmann rule predicts that elimination with a bulky base gives which alkene as the major product?
(1) more substituted alkene
(2) alkyne
(3) no alkene
(4) less substituted alkene
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: less substituted alkene Step-by-Step Derivation
Bulky bases favour the less substituted (Hofmann) alkene.
QUESTION 4 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Chloromethane has a larger dipole moment (1.860 D) than fluoromethane (1.847 D) even though fluorine is more electronegative than chlorine. This is because:
(1) Dipole moment depends on bond length as well, and the longer C–Cl bond outweighs the smaller electronegativity difference
(2) The C–Cl bond is shorter than the C–F bond
(3) Chlorine is more electronegative than fluorine in organic compounds
(4) Fluorine's high electronegativity makes the C–F bond non-polar
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Dipole moment depends on bond length as well, and the longer C–Cl bond outweighs the smaller electronegativity difference Step-by-Step Derivation
Dipole moment is μ = q × d, the product of charge separation and distance. Although fluorine gives a larger charge difference (q), chlorine's much longer C–Cl bond (178 pm vs 139 pm for C–F) enlarges the distance term (d) enough to give CH₃Cl the higher μ.
QUESTION 5 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Which halogenated compound has its halogen bonded to an sp²-hybridised carbon and is therefore largely inert toward nucleophilic substitution?
(1) Benzyl chloride (C₆H₅–CH₂Cl)
(2) Allyl chloride (CH₂=CH–CH₂Cl)
(3) Ethyl chloride (CH₃CH₂Cl)
(4) Vinyl chloride (CH₂=CH–Cl)
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Vinyl chloride (CH₂=CH–Cl) Step-by-Step Derivation
Vinyl chloride has its chlorine directly attached to a C=C carbon, which is sp²-hybridised. Vinylic (and aryl) halides are inert toward nucleophilic substitution. Benzyl, allyl and ethyl halides all carry the halogen on sp³ carbons.
QUESTION 6 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
In electrophilic aromatic substitution, halogens are deactivating groups yet they direct the incoming electrophile to which ring positions?
(1) meta
(2) ortho and para
(3) only meta
(4) only ortho
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: ortho and para Step-by-Step Derivation
Halogens are ortho/para directing despite being deactivating (–I > +R).
QUESTION 7 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
In E2 elimination, the departing β-hydrogen and the leaving group must adopt which spatial arrangement for the reaction to proceed?
(1) syn-periplanar
(2) perpendicular (90°)
(3) gauche
(4) anti-periplanar
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: anti-periplanar Step-by-Step Derivation
E2 requires the H and leaving group to be anti-periplanar (180°).
QUESTION 8 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Which polyhalogen compound is a chlorofluorocarbon whose use depletes the stratospheric ozone layer?
(1) chloroform
(2) Freon (CCl₂F₂)
(3) phosgene (COCl₂)
(4) DDT
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Freon (CCl₂F₂) Step-by-Step Derivation
Freons are CFCs that destroy stratospheric ozone.
QUESTION 9 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
The Wurtz reaction couples two alkyl halide molecules using which metal in dry ether?
(1) zinc
(2) sodium
(3) magnesium
(4) lithium
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: sodium Step-by-Step Derivation
Wurtz reaction uses sodium to couple alkyl halides into a higher alkane.
QUESTION 10 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
For an E2 elimination to occur, what relative geometry must the β-C–H and α-C–X bonds adopt?
(1) Anti-periplanar (180° dihedral angle)
(2) Any geometry, because E2 is not stereospecific
(3) Perpendicular (90° dihedral angle)
(4) Syn-periplanar (0° dihedral angle)
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Anti-periplanar (180° dihedral angle) Step-by-Step Derivation
E2 is a concerted elimination that requires the β-C–H and α-C–X bonds to lie anti-periplanar (180°) so their orbitals overlap optimally to form the new π bond as the proton is abstracted and the halide leaves.
QUESTION 11 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Halogens attached to a benzene ring are deactivating yet ortho/para-directing in electrophilic substitution. This 'halogen paradox' arises because:
(1) The halogen's +R effect withdraws density overall while its –I effect donates at ortho/para
(2) The strong –I effect withdraws σ-density overall (deactivating), while the weak +R effect donates π-density specifically at ortho/para positions (directing)
(3) The halogen is both a strong +R and a strong –I donor overall
(4) The halogen donates electron density at the meta position while withdrawing from ortho/para
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: The strong –I effect withdraws σ-density overall (deactivating), while the weak +R effect donates π-density specifically at ortho/para positions (directing) Step-by-Step Derivation
The inductive effect (–I) of the electronegative halogen withdraws electron density from the whole ring, making it react slower than benzene (deactivating). At the same time, the halogen's lone pair donates by resonance (+R) into the ring, enriching only the ortho and para positions, which then direct incoming electrophiles there.
QUESTION 12 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
The rate of an SN1 reaction depends only on the substrate concentration and is independent of the nucleophile concentration. Why?
(1) The nucleophile is always present in large excess
(2) The rate-determining step is the slow formation of the carbocation, which involves only the substrate
(3) The nucleophile is too weak to influence the rate
(4) SN1 follows a bimolecular rate law
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: The rate-determining step is the slow formation of the carbocation, which involves only the substrate Step-by-Step Derivation
SN1 proceeds in two steps: slow heterolysis of the C–X bond to form a planar carbocation (rate-determining), then fast attack by the nucleophile. Since only the substrate is involved in the slow step, the rate law is Rate = k[substrate] (first order).
QUESTION 13 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Which reagent converts an alcohol into an alkyl chloride while releasing two gaseous byproducts, so that essentially pure product is obtained without a separation step?
(1) PCl₃
(2) Red phosphorus + Cl₂
(3) PCl₅
(4) SOCl₂ (thionyl chloride)
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: SOCl₂ (thionyl chloride) Step-by-Step Derivation
The Darzens process uses thionyl chloride: R–OH + SOCl₂ → R–Cl + SO₂↑ + HCl↑. Both SO₂ and HCl are volatile gases that escape, leaving pure alkyl chloride, so no purification is needed.
QUESTION 14 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Which reagent converts an alcohol directly into the corresponding alkyl chloride, releasing SO₂ and HCl as by-products?
(1) SOCl₂ (thionyl chloride)
(2) HCl
(3) PCl₃
(4) Cl₂
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: SOCl₂ (thionyl chloride) Step-by-Step Derivation
Thionyl chloride replaces –OH by –Cl with loss of SO₂ and HCl.
QUESTION 15 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Aryl halides are generally unreactive toward nucleophilic substitution because of which structural feature of the C–X bond?
(1) free rotation about C–X
(2) sp³ hybridised carbon
(3) resonance giving partial double-bond character
(4) absence of π electrons
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: resonance giving partial double-bond character Step-by-Step Derivation
Resonance shortens and strengthens the C–X bond, making it hard to break.
QUESTION 16 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Which base gives the less-substituted (Hofmann) alkene as the major product in elimination, and for what reason?
(1) Alcoholic KOH, because it forms a carbocation
(2) Bulky potassium tert-butoxide (t-BuOK), because steric hindrance forces abstraction of the accessible terminal β-hydrogen
(3) Dilute aqueous NaOH, because it is a strong base
(4) Concentrated HCl, because it protonates the alkene
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Bulky potassium tert-butoxide (t-BuOK), because steric hindrance forces abstraction of the accessible terminal β-hydrogen Step-by-Step Derivation
A bulky base such as t-BuOK cannot reach the internal β-hydrogens due to steric congestion, so it abstracts only the more accessible terminal hydrogen, giving the less-substituted Hofmann alkene as the major product.
QUESTION 17 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
In the Finkelstein reaction, an alkyl chloride or bromide is converted to an alkyl iodide using NaI in dry acetone. Why is dry acetone essential?
(1) Acetone prevents the formation of alkene side-products
(2) NaI dissolves in dry acetone whereas the NaCl/NaBr formed precipitates out, shifting the equilibrium to favour R–I
(3) Acetone makes the C–X bond more reactive toward iodide
(4) Acetone supplies the iodide ions needed for the reaction
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: NaI dissolves in dry acetone whereas the NaCl/NaBr formed precipitates out, shifting the equilibrium to favour R–I Step-by-Step Derivation
Acetone is a covalent solvent that dissolves NaI (large I⁻ has covalent character) but not the ionic NaCl/NaBr lattices. Precipitation of NaCl/NaBr removes product from the equilibrium and, by Le Chatelier's principle, drives the reaction to completion.
QUESTION 18 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
The SN2 mechanism proceeds in a single step via backside attack of the nucleophile, which produces what stereochemical outcome at the reaction centre?
(1) inversion of configuration (Walden inversion)
(2) no change in configuration
(3) racemisation
(4) retention of configuration
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: inversion of configuration (Walden inversion) Step-by-Step Derivation
Backside attack in SN2 inverts the configuration at the carbon.
QUESTION 19 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
Unlike ortho- and para-nitrochlorobenzenes, meta-nitrochlorobenzene is almost as unreactive as chlorobenzene toward nucleophilic substitution. Why?
(1) The meta isomer is more sterically hindered than the ortho isomer
(2) The meta –NO₂ group lengthens the C–Cl bond
(3) In the Meisenheimer intermediate the negative charge never falls on the carbon bearing the –NO₂ group, so it cannot be resonance-stabilised
(4) The meta –NO₂ group withdraws electrons by resonance from the C–Cl bond
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: In the Meisenheimer intermediate the negative charge never falls on the carbon bearing the –NO₂ group, so it cannot be resonance-stabilised Step-by-Step Derivation
Nucleophilic aromatic substitution proceeds through a Meisenheimer carbanion. For an ortho/para –NO₂ group, the negative charge lands on the nitro-bearing carbon where it can be delocalised. In the meta isomer the charge alternates between positions that never include the carbon bearing –NO₂, so the nitro group provides no stabilisation and reactivity stays low.
QUESTION 20 CHEMISTRY · Haloalkanes and Haloarenes
SECTION A · MCQ (+4, -1)
A Grignard reagent (R–MgX) reacts immediately on contact with water. What is the product?
(1) The alkane R–H together with Mg(OH)X
(2) An alcohol R–OH
(3) An alkene
(4) The original halide R–X is regenerated
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: The alkane R–H together with Mg(OH)X Step-by-Step Derivation
The C–Mg bond is strongly polarised toward carbon, making it a carbanion that acts as a strong base. Water (an active proton source) instantly protonates it: R–MgX + H₂O → R–H + Mg(OH)X. This is why Grignard reactions require rigorously dry ether.