EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
⚡ OFFICIAL NTA ASSESSMENT GENERATOR & WORD (.DOCX) EXPORTER

Solutions · Practice Worksheet

JEE Main Chemistry · Curated Assessment Set Print directly or export as a beautifully formatted Microsoft Word document with embedded 180-DPI mathematical prompt clips and step-by-step derivations.

QUESTIONS: (26 available in pool)
✎ Take it online 🙈 Hide Solutions ⬇ Export .docx
EDUPROD JEE MAIN TEST SERIES · NTA PATTERN

Solutions · Practice Worksheet

JEE Main Chemistry · Curated Assessment Set · Assessment Code: JEE-101

Total Marks: 100
Marking: +4 / -1 (Sec A) · +4 / 0 (Sec B)
Candidate Name: __________________________
Roll No.: _____________________
Date: __________________
QUESTION 1 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
Question 1
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: 3 Step-by-Step Derivation
Derivation
QUESTION 2 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
Question 2
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: 2 Step-by-Step Derivation
Derivation
QUESTION 3 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
A student heats an aqueous NaCl solution from 25 °C to 60 °C. Which of the following concentration terms remains unchanged?
(1) Molarity
(2) Molality
(3) Normality
(4) Percent weight/volume (%w/v)
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Molality Step-by-Step Derivation
Molality is moles of solute per kilogram of solvent, a mass-based quantity unaffected by thermal expansion. Molarity, normality and %w/v all depend on solution volume, which increases on heating, so they all decrease.
QUESTION 4 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
In a 10% (w/w) aqueous glucose solution, how many grams of water are present alongside 10 g of glucose?
(1) 100 g
(2) 90 g
(3) 10 g
(4) 110 g
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: 90 g Step-by-Step Derivation
10% (w/w) means 10 g glucose per 100 g of solution. Since solution mass = solute + solvent, the mass of water is 100 − 10 = 90 g.
QUESTION 5 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
When benzoic acid dimerizes in benzene, its observed molar mass is how related to the normal value?
(1) Zero
(2) Lower than normal
(3) Higher than normal
(4) Equal to normal
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Higher than normal Step-by-Step Derivation
Association (dimerization) gives an abnormally high molar mass.
QUESTION 6 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
A solution that obeys Raoult's law at all concentrations with zero enthalpy of mixing is called what?
(1) Ideal solution
(2) Non-ideal solution
(3) Saturated solution
(4) Azeotrope
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Ideal solution Step-by-Step Derivation
Ideal solutions obey Raoult's law with ΔH_mix = 0 and ΔV_mix = 0.
QUESTION 7 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
The sum of the mole fractions of all components in a solution is equal to what?
(1) 0
(2) 1
(3) 6.022 × 10²³
(4) 100
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: 1 Step-by-Step Derivation
Mole fractions of all components always add up to unity.
QUESTION 8 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
For a dilute solution of a non-volatile solute, the relative lowering of vapour pressure (P₁° − P₁)/P₁° equals which quantity?
(1) The mole fraction of the solute, χ₂
(2) The mole fraction of the solvent, χ₁
(3) The total pressure of the solution
(4) The molality of the solution
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: The mole fraction of the solute, χ₂ Step-by-Step Derivation
Raoult's law for a non-volatile solute gives (P₁° − P₁)/P₁° = χ₂, the mole fraction of the SOLUTE. It is independent of the solute's identity and depends only on how many solute particles are present.
QUESTION 9 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
According to Raoult's law, the partial vapour pressure of a volatile component is directly proportional to what?
(1) Its mole fraction
(2) The total pressure
(3) The temperature
(4) Its molar mass
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Its mole fraction Step-by-Step Derivation
Raoult's law: p = p° × mole fraction of the component.
QUESTION 10 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
Osmotic pressure is the preferred colligative property for determining the molar mass of which type of solute?
(1) Dilute ionic salts
(2) Polymers and biomolecules
(3) Volatile liquids
(4) Gases
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Polymers and biomolecules Step-by-Step Derivation
Osmotic pressure is large and easily measured for macromolecules like proteins.
QUESTION 11 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
For complete dissociation of NaCl in water, the van 't Hoff factor (i) is equal to what?
(1) 1
(2) 0.5
(3) 2
(4) 3
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: 2 Step-by-Step Derivation
NaCl dissociates into Na⁺ and Cl⁻, giving i = 2.
QUESTION 12 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
A mixture showing a positive deviation from Raoult's law forms which type of azeotrope?
(1) A maximum-boiling azeotrope
(2) An ideal azeotrope
(3) A minimum-boiling azeotrope
(4) No azeotrope
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: A minimum-boiling azeotrope Step-by-Step Derivation
Positive deviation means vapour pressure is higher than ideal, so the mixture boils at a lower temperature; the azeotrope there is a minimum-boiling azeotrope (e.g. 95.4% ethanol/water). Negative deviation gives a maximum-boiling azeotrope.
QUESTION 13 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
A constant-boiling mixture that cannot be separated into its components by fractional distillation is called what?
(1) Isotope
(2) Allotrope
(3) Isomer
(4) Azeotrope
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Azeotrope Step-by-Step Derivation
An azeotrope boils at a constant temperature with unchanged composition.
QUESTION 14 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
The relative lowering of vapour pressure of a solution containing a non-volatile solute equals which quantity?
(1) Mole fraction of the solute
(2) Molarity of the solute
(3) Mole fraction of the solvent
(4) Molality of the solvent
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Mole fraction of the solute Step-by-Step Derivation
(p° − p)/p° equals the mole fraction of the non-volatile solute.
QUESTION 15 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
Why does a cold bottle of soda retain more dissolved CO₂ than a warm one?
(1) Cooling raises the partial pressure of CO₂
(2) Cooling increases K_H, trapping more gas
(3) Gas dissolution is endothermic, so cooling releases CO₂
(4) Gas dissolution is exothermic, so cooling shifts equilibrium toward more dissolved gas
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Gas dissolution is exothermic, so cooling shifts equilibrium toward more dissolved gas Step-by-Step Derivation
Dissolving a gas is exothermic (ΔH < 0). By Le Chatelier's principle, lowering temperature favours the exothermic forward direction (Gas + Liquid ⇌ Solution + Heat), so more CO₂ stays dissolved in the cold soda.
QUESTION 16 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
According to Henry's law, the solubility of a gas in a liquid is directly proportional to which quantity?
(1) Volume of the solvent
(2) Partial pressure of the gas
(3) Temperature of the solution
(4) Molar mass of the gas
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Partial pressure of the gas Step-by-Step Derivation
Henry's law states solubility ∝ partial pressure of the gas above the liquid.
QUESTION 17 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
Which colligative property is preferred for determining the molar mass of a protein, and why?
(1) Freezing-point depression, because it is the largest effect
(2) Osmotic pressure, because it is measurable at room temperature for large molecules
(3) Boiling-point elevation, because it is easiest to measure
(4) Vapour-pressure lowering, because it needs no membrane
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Osmotic pressure, because it is measurable at room temperature for large molecules Step-by-Step Derivation
For high-molar-mass biomolecules, freezing/boiling shifts are far too small to measure reliably, and heating would denature the protein. Osmotic pressure is measured at ambient temperature and gives a large, easily measured head, making it the gold-standard method.
QUESTION 18 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
What is the freezing point of a 1 molal aqueous solution of a non-electrolyte? (water K_f = 1.86 K kg mol⁻¹)
(1) −1.86 °C
(2) 0 °C
(3) +1.86 °C
(4) −0.52 °C
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: −1.86 °C Step-by-Step Derivation
ΔT_f = K_f·m = 1.86 × 1 = 1.86 K. The freezing point is depressed below 0 °C, so T_f = 0 − 1.86 = −1.86 °C.
QUESTION 19 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
Adding a non-volatile solute to a solvent causes the freezing point to do what?
(1) Increase
(2) Decrease
(3) Become equal to the boiling point
(4) Remain unchanged
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Decrease Step-by-Step Derivation
A non-volatile solute depresses the freezing point of the solvent.
QUESTION 20 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
For a solute that associates into dimers (n = 2), what is the degree of association β in terms of the van 't Hoff factor i?
(1) β = 1 − i
(2) β = 2(1 − i)
(3) β = 2i − 1
(4) β = (i − 1)/2
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: β = 2(1 − i) Step-by-Step Derivation
For association 2A → A₂, the van 't Hoff factor is i = 1 − β(1 − 1/n) = 1 − β/2, which rearranges to β = 2(1 − i).
QUESTION 21 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
Decompression sickness ('the bends') in deep-sea divers is caused by bubbles of which gas?
(1) Oxygen
(2) Carbon dioxide
(3) Nitrogen
(4) Helium
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Nitrogen Step-by-Step Derivation
Rapid ascent releases dissolved N2 as bubbles in the blood.
QUESTION 22 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
What is the van 't Hoff factor (i) for a fully dissociated Al₂(SO₄)₃ solution?
(1) 2
(2) 5
(3) 3
(4) 4
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: 5 Step-by-Step Derivation
Al₂(SO₄)₃ dissociates into 2 Al³⁺ and 3 SO₄²⁻ ions, giving n = 5 particles per formula unit, so i = 5 at complete dissociation (α = 1).
QUESTION 23 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
For an ideal solution, which of the following mixing quantities are exactly zero?
(1) ΔH_mix and ΔS_mix
(2) ΔS_mix and ΔG_mix
(3) ΔH_mix and ΔV_mix
(4) ΔV_mix and ΔS_mix
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: ΔH_mix and ΔV_mix Step-by-Step Derivation
An ideal solution has A–B forces equal to A–A and B–B, so mixing releases no heat and changes no volume: ΔH_mix = 0 and ΔV_mix = 0. Entropy of mixing is ALWAYS positive and ΔG_mix is always negative for spontaneous mixing.
QUESTION 24 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
At a fixed partial pressure, which gas dissolves more readily in a given solvent — the one with a higher K_H or a lower K_H?
(1) It depends only on molar mass
(2) The one with the lower K_H
(3) The one with the higher K_H
(4) Both dissolve equally
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: The one with the lower K_H Step-by-Step Derivation
Henry's law p = K_H·χ rearranges to χ = p/K_H, so for the same partial pressure a smaller K_H gives a larger dissolved mole fraction. K_H is a 'resistance to dissolving'.
QUESTION 25 CHEMISTRY · Solutions
SECTION A · MCQ (+4, -1)
Which concentration term is independent of temperature?
(1) Molarity
(2) Mass by volume percent
(3) Normality
(4) Molality
Candidate Response: (1)   (2)   (3)   (4)
⚡ OFFICIAL KEY: Molality Step-by-Step Derivation
Molality uses mass of solvent, so it does not change with temperature.