✎ ANSWER ONLINE · EVERY MISTAKE LINKS BACK TO THE CONCEPT
Solutions · Practice Worksheet
Answer each question here and it marks straight away, with the derivation and a link to the exact micro-concept to revisit.
3 questions from this set could not be marked online — a
bonus or dual-key question, which has no single defensible answer. The print and
.docx versions still include them.
// CONCEPT AUDIT RESULT
Everything you missed has been added to your Error Arena — retest them blind there, and a concept clears once you get it right.
QUESTION 1
Solutions
SECTION A · MCQ (+4, -1)

(1) [Cr(NH3)6] Cl3
(2) [Cr(NH3)4Cl2] Cl
(3) [Cr(NH3)5Cl] Cl2
(4) [Cr(NH3)3Cl3]
(3)
Given : ΔTf = 0.558°C
f
K
kg
k
1.86 mol × =
0.1 m aq. sol.
⇒ ΔTf = i × kf × m
⇒ 0.558 = i × 1.86 × 0.1
⇒ i = 3
2
QUESTION 2
Solutions
SECTION A · MCQ (+4, -1)

(1) Statement I is false but Statement II is true
(2) Both Statement I and Statement II are true
(3) Both Statement I and Statement II are false
(4) Statement I is true but Statement II is false
QUESTION 3
Solutions
SECTION A · MCQ (+4, -1)
A student heats an aqueous NaCl solution from 25 °C to 60 °C. Which of the following concentration terms remains unchanged?
(1) Molarity
(2) Molality
(3) Normality
(4) Percent weight/volume (%w/v)
Molality is moles of solute per kilogram of solvent, a mass-based quantity unaffected by thermal expansion. Molarity, normality and %w/v all depend on solution volume, which increases on heating, so they all decrease.
QUESTION 4
Solutions
SECTION A · MCQ (+4, -1)
In a 10% (w/w) aqueous glucose solution, how many grams of water are present alongside 10 g of glucose?
(1) 100 g
(2) 90 g
(3) 10 g
(4) 110 g
10% (w/w) means 10 g glucose per 100 g of solution. Since solution mass = solute + solvent, the mass of water is 100 − 10 = 90 g.
QUESTION 5
Solutions
SECTION A · MCQ (+4, -1)
When benzoic acid dimerizes in benzene, its observed molar mass is how related to the normal value?
(1) Zero
(2) Lower than normal
(3) Higher than normal
(4) Equal to normal
Association (dimerization) gives an abnormally high molar mass.
QUESTION 6
Solutions
SECTION A · MCQ (+4, -1)
A solution that obeys Raoult's law at all concentrations with zero enthalpy of mixing is called what?
(1) Ideal solution
(2) Non-ideal solution
(3) Saturated solution
(4) Azeotrope
Ideal solutions obey Raoult's law with ΔH_mix = 0 and ΔV_mix = 0.
QUESTION 7
Solutions
SECTION A · MCQ (+4, -1)
The sum of the mole fractions of all components in a solution is equal to what?
(1) 0
(2) 1
(3) 6.022 × 10²³
(4) 100
Mole fractions of all components always add up to unity.
QUESTION 8
Solutions
SECTION A · MCQ (+4, -1)
According to Raoult's law, the partial vapour pressure of a volatile component is directly proportional to what?
(1) Its mole fraction
(2) The total pressure
(3) The temperature
(4) Its molar mass
Raoult's law: p = p° × mole fraction of the component.
QUESTION 9
Solutions
SECTION A · MCQ (+4, -1)
Osmotic pressure is the preferred colligative property for determining the molar mass of which type of solute?
(1) Dilute ionic salts
(2) Polymers and biomolecules
(3) Volatile liquids
(4) Gases
Osmotic pressure is large and easily measured for macromolecules like proteins.
QUESTION 10
Solutions
SECTION A · MCQ (+4, -1)
For complete dissociation of NaCl in water, the van 't Hoff factor (i) is equal to what?
(1) 1
(2) 0.5
(3) 2
(4) 3
NaCl dissociates into Na⁺ and Cl⁻, giving i = 2.
QUESTION 11
Solutions
SECTION A · MCQ (+4, -1)
A mixture showing a positive deviation from Raoult's law forms which type of azeotrope?
(1) A maximum-boiling azeotrope
(2) An ideal azeotrope
(3) A minimum-boiling azeotrope
(4) No azeotrope
Positive deviation means vapour pressure is higher than ideal, so the mixture boils at a lower temperature; the azeotrope there is a minimum-boiling azeotrope (e.g. 95.4% ethanol/water). Negative deviation gives a maximum-boiling azeotrope.
QUESTION 12
Solutions
SECTION A · MCQ (+4, -1)
A constant-boiling mixture that cannot be separated into its components by fractional distillation is called what?
(1) Isotope
(2) Allotrope
(3) Isomer
(4) Azeotrope
An azeotrope boils at a constant temperature with unchanged composition.
QUESTION 13
Solutions
SECTION A · MCQ (+4, -1)
The relative lowering of vapour pressure of a solution containing a non-volatile solute equals which quantity?
(1) Mole fraction of the solute
(2) Molarity of the solute
(3) Mole fraction of the solvent
(4) Molality of the solvent
(p° − p)/p° equals the mole fraction of the non-volatile solute.
QUESTION 14
Solutions
SECTION A · MCQ (+4, -1)
According to Henry's law, the solubility of a gas in a liquid is directly proportional to which quantity?
(1) Volume of the solvent
(2) Partial pressure of the gas
(3) Temperature of the solution
(4) Molar mass of the gas
Henry's law states solubility ∝ partial pressure of the gas above the liquid.
QUESTION 15
Solutions
SECTION A · MCQ (+4, -1)
What is the freezing point of a 1 molal aqueous solution of a non-electrolyte? (water K_f = 1.86 K kg mol⁻¹)
(1) −1.86 °C
(2) 0 °C
(3) +1.86 °C
(4) −0.52 °C
ΔT_f = K_f·m = 1.86 × 1 = 1.86 K. The freezing point is depressed below 0 °C, so T_f = 0 − 1.86 = −1.86 °C.
QUESTION 16
Solutions
SECTION A · MCQ (+4, -1)
Adding a non-volatile solute to a solvent causes the freezing point to do what?
(1) Increase
(2) Decrease
(3) Become equal to the boiling point
(4) Remain unchanged
A non-volatile solute depresses the freezing point of the solvent.
QUESTION 17
Solutions
SECTION A · MCQ (+4, -1)
For a solute that associates into dimers (n = 2), what is the degree of association β in terms of the van 't Hoff factor i?
(1) β = 1 − i
(2) β = 2(1 − i)
(3) β = 2i − 1
(4) β = (i − 1)/2
For association 2A → A₂, the van 't Hoff factor is i = 1 − β(1 − 1/n) = 1 − β/2, which rearranges to β = 2(1 − i).
QUESTION 18
Solutions
SECTION A · MCQ (+4, -1)
Decompression sickness ('the bends') in deep-sea divers is caused by bubbles of which gas?
(1) Oxygen
(2) Carbon dioxide
(3) Nitrogen
(4) Helium
Rapid ascent releases dissolved N2 as bubbles in the blood.
QUESTION 19
Solutions
SECTION A · MCQ (+4, -1)
What is the van 't Hoff factor (i) for a fully dissociated Al₂(SO₄)₃ solution?
(1) 2
(2) 5
(3) 3
(4) 4
Al₂(SO₄)₃ dissociates into 2 Al³⁺ and 3 SO₄²⁻ ions, giving n = 5 particles per formula unit, so i = 5 at complete dissociation (α = 1).
QUESTION 20
Solutions
SECTION A · MCQ (+4, -1)
For an ideal solution, which of the following mixing quantities are exactly zero?
(1) ΔH_mix and ΔS_mix
(2) ΔS_mix and ΔG_mix
(3) ΔH_mix and ΔV_mix
(4) ΔV_mix and ΔS_mix
An ideal solution has A–B forces equal to A–A and B–B, so mixing releases no heat and changes no volume: ΔH_mix = 0 and ΔV_mix = 0. Entropy of mixing is ALWAYS positive and ΔG_mix is always negative for spontaneous mixing.
QUESTION 21
Solutions
SECTION A · MCQ (+4, -1)
At a fixed partial pressure, which gas dissolves more readily in a given solvent — the one with a higher K_H or a lower K_H?
(1) It depends only on molar mass
(2) The one with the lower K_H
(3) The one with the higher K_H
(4) Both dissolve equally
Henry's law p = K_H·χ rearranges to χ = p/K_H, so for the same partial pressure a smaller K_H gives a larger dissolved mole fraction. K_H is a 'resistance to dissolving'.
QUESTION 22
Solutions
SECTION A · MCQ (+4, -1)
Which concentration term is independent of temperature?
(1) Molarity
(2) Mass by volume percent
(3) Normality
(4) Molality
Molality uses mass of solvent, so it does not change with temperature.