EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

// CHAPTER_OVERVIEW Electrochemistry is the branch of chemistry that studies the interconversion of chemical energy and electrical energy. It encompasses: (1) Galvanic (voltaic) cells producing electricity through spontaneous redox reactions, epitomized by the Daniell cell (Zn-Cu, E° = 1.10 V), salt bridge mechanics, Standard Hydrogen Electrode (SHE, 0.00 V), and electrochemical series ranking; (2) The Nernst Equation quantifying non-standard cell potentials (E_cell = E° - (0.0591/n) log Q), equilibrium constants (Kc), and concentration cells; (3) Electrochemical cell thermodynamics linking maximum electrical work to Gibbs free energy (ΔG = -nFE), enthalpy (ΔH), and entropy temperature coefficients; (4) Electrolytic conductance metrics (R, G, κ, G*, Λm), Debye-Hückel-Onsager behavior, and Kohlrausch's law of independent ionic migration determining weak electrolyte degree of dissociation (α) and Ka; (5) Quantitative electrolysis through Faraday's 1st and 2nd laws, kinetic overpotential anomalies (Cl2 vs O2 evolution in brine), and selective discharge products; and (6) Commercial portable power sources (dry cells, mercury button cells, rechargeable lead-acid accumulators, Ni-Cd batteries), Apollo H2-O2 fuel cells with 70% efficiency, and electrochemical mechanisms of iron rusting corrosion alongside cathodic protection.
⚡ INTEGRATED VIRTUAL LABORATORIES (3)
Open Subject Labs Catalog ↗
Electrochemical Nernst
Stage ↗
Electrolysis Faraday
Stage ↗
Galvanic Cell Emf
Stage ↗
01

Galvanic Cells, Daniell Cell Architecture & Electrode Potentials

2 concepts · Foundational
2 nodes

How does a galvanic cell convert spontaneous redox energy into electrical power, what are the three functions of a salt bridge, and how does opposing external voltage (E_ext) reverse cell behavior?

Galvanic cells convert chemical energy of spontaneous redox reactions into electrical work. The canonical Daniell cell comprises a zinc anode in ZnSO4 solution undergoing oxidation (Zn -> Zn2+ + 2e-) and a copper cathode in CuSO4 solution undergoing reduction (Cu2+ + 2e- -> Cu), delivering a standard potential of E°cell = 1.10 V. The salt bridge (KCl/KNO3 in agar-agar) completes the circuit, preserves half-cell electrical neutrality, and eliminates liquid junction potential. Applying an external opposing potential (E_ext) demonstrates three distinct regimes: E_ext < 1.10 V (normal galvanic discharge), E_ext = 1.10 V (dynamic equilibrium, zero current), and E_ext > 1.10 V (electrolytic reversal, where current and chemistry flow backward).

01

Daniell Cell Construction and Half-Reactions

In a Daniell cell a zinc anode immersed in ZnSO4(aq) is oxidised (Zn → Zn2+ + 2e−) while a copper cathode in CuSO4(aq) is reduced (Cu2+ + 2e− → Cu), giving a standard cell potential E°cell = +1.10 V. Electrons flow externally from Zn to Cu, while conventional current flows Cu → Zn.

Key Idea
Zn is the anode (oxidation, negative) and Cu the cathode (reduction, positive), with E°cell = 1.10 V.
Why It Works
Zinc (E° = −0.76 V) is a stronger reducing agent than copper (E° = +0.34 V), so Zn spontaneously loses electrons that reduce Cu2+; the potential difference between the two reduction potentials is the driving force.
Boundary Trap
Confusing electron flow with conventional current — electrons travel Zn → Cu through the wire, but conventional current is drawn in the opposite direction (Cu → Zn).
Application Note
Cell notation Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s); E°cell = +0.34 − (−0.76) = 1.10 V.
Authoritative Anchor
NCERT presents the Daniell cell as the canonical galvanic cell and stresses that oxidation always occurs at the anode and reduction at the cathode.
🔬 VIRTUAL LAB Galvanic Cell Emf
Full Stage ↗
? Quick Concept Check

In the Daniell cell, which electrode is the anode and what is its sign?

Answer: The zinc electrode (oxidation site), which is the negative terminal.

02

Salt Bridge Functions and Electrode Potential Convention

A salt bridge (KCl/KNO3 in agar-agar) completes the circuit by migrating ions, maintains electrical neutrality of both half-cells, and minimises the liquid junction potential. Standard electrode potentials are reduction potentials measured against the Standard Hydrogen Electrode (SHE), defined as 0.00 V.

Key Idea
E° always means standard reduction potential vs SHE (0.00 V); the salt bridge uses ions of nearly equal mobility.
Why It Works
As the cell runs, Zn2+ accumulates at the anode and SO4(2−) is depleted at the cathode, creating charge imbalance; the salt bridge lets K+ and Cl− migrate to restore neutrality, and choosing ions of nearly equal transport numbers (u_K+ ≈ u_Cl−) prevents charge separation that would create a junction potential.
Boundary Trap
Treating E° as an oxidation potential for the anode; E° values are always reduction potentials, so the anode's value is subtracted, not flipped in sign.
Application Note
KCl works in a salt bridge because K+ and Cl− have almost identical mobilities; Li (E° = −3.05 V) is the strongest reducing agent and F2 (E° = +2.87 V) the strongest oxidising agent.
Authoritative Anchor
NCERT lists the three roles of the salt bridge and the IUPAC convention that E° is always a reduction potential, with E°cell = E°cathode − E°anode.
🔬 VIRTUAL LAB Galvanic Cell Emf
Full Stage ↗
? Quick Concept Check

Why must the salt-bridge cations and anions have nearly equal mobility?

Answer: To avoid net charge separation that would create a liquid junction potential.

02

Nernst Equation Formulation, Equilibrium Constant & Concentration Cells

2 concepts · Foundational
2 nodes

How does the Nernst equation quantify electrode potentials under non-standard conditions, why does a battery's cell potential reach exactly 0.00 V at equilibrium, and how do concentration cells operate with E° = 0.00 V?

The Nernst equation calculates the electrode and cell potentials at non-standard ion concentrations and temperatures. For a general reaction a A + b B ⇌ c C + d D, E_cell = E°_cell - (RT / nF) ln Q. At 298.15 K, this simplifies to E_cell = E°_cell - (0.0591 / n) log Q. When an electrochemical cell discharges completely, the reaction quotient reaches the equilibrium constant (Q = Kc) and the cell potential drops to E_cell = 0.00 V, yielding log Kc = (n · E°_cell) / 0.0591. In concentration cells, two identical electrodes are placed in solutions of the same electrolyte at different concentrations (C1 < C2): while E°_cell is strictly 0.00 V, a spontaneous potential develops: E_cell = (0.0591 / n) log (C2 / C1).

01

Nernst Equation and Reaction Quotient Powers

The Nernst equation gives the cell potential under non-standard conditions: E_cell = E°cell − (RT/nF) ln Q, which at 298 K becomes E_cell = E°cell − (0.0591/n) log Q. The reaction quotient Q uses the balanced cell reaction with stoichiometric coefficients as exponents.

Key Idea
E = E° − (0.0591/n) log Q at 298 K, with each concentration raised to its stoichiometric power.
Why It Works
Deviating from 1 M (standard) concentrations changes the free-energy driving force; the logarithmic Q term quantifies this concentration dependence, a larger Q meaning less forward driving force and hence a lower potential.
Boundary Trap
Forgetting to square [Ag+] in Q for cells like Ni|Ni2+||Ag+|Ag — the single most common Nernst error in entrance exams.
Application Note
For the cell Ni + 2Ag+ → Ni2+ + 2Ag (n = 2), Q = [Ni2+]/[Ag+]2.
Authoritative Anchor
NCERT derives the Nernst equation for both electrode and cell potentials and insists on including stoichiometric powers inside Q.
🔬 VIRTUAL LAB Electrochemical Nernst
Full Stage ↗
? Quick Concept Check

Write Q for the cell reaction Ni + 2Ag+ → Ni2+ + 2Ag.

Answer: Q = [Ni2+]/[Ag+]2.

02

Equilibrium Constant and Concentration Cells

At equilibrium E_cell = 0 and Q = Kc, giving log Kc = (n E°cell)/0.0591 at 298 K. A concentration cell uses identical electrodes in solutions of the same electrolyte at different concentrations (C1 < C2), so E°cell = 0 yet E_cell = (0.0591/n) log (C2/C1).

Key Idea
At equilibrium E_cell = 0 (not E°cell), and a concentration cell runs purely on the concentration difference.
Why It Works
When Q reaches Kc the forward and reverse rates balance, so no net current flows and E_cell falls to zero; in a concentration cell the only driving force is dilution toward equal concentration, captured by the log(C2/C1) term.
Boundary Trap
Believing E°cell also becomes zero at equilibrium — only E_cell falls to zero, while E°cell stays fixed.
Application Note
Daniell cell: log Kc = (2 × 1.10)/0.0591 = 37.28, so Kc ≈ 1.9 × 10³⁷, meaning the displacement is virtually complete.
Authoritative Anchor
NCERT proves that E_cell = 0 at equilibrium while E°cell remains an invariant constant, and derives the concentration-cell EMF formula.
🔬 VIRTUAL LAB Electrochemical Nernst
Full Stage ↗
? Quick Concept Check

What is the EMF of a concentration cell when C1 = C2?

Answer: Zero, because log(C2/C1) = log 1 = 0.

03

Cell Thermodynamics: Gibbs Free Energy & Maximum Electrical Work

2 concepts · Foundational
2 nodes

How is the maximum electrical work of a reversible cell quantitatively coupled to Gibbs free energy, why is E°cell intensive while ΔG° is extensive, and how does the temperature coefficient reveal reaction entropy?

Electrical work performed by a galvanic cell equals charge passed multiplied by potential: W_elec = n F E_cell. The maximum electrical work obtainable from a reversible cell at constant temperature and pressure equals the decrease in Gibbs free energy: Δ_r G = - W_max = - n F E_cell. Under standard conditions, Δ_r G° = - n F E°_cell = - 2.303 R T log Kc. E°_cell is an INTENSIVE property (independent of reaction scale), whereas Δ_r G is an EXTENSIVE property (scales with stoichiometric multipliers). The temperature coefficient of cell EMF, (∂E/∂T)_p, directly gives the entropy of the cell reaction: Δ_r S = n F (∂E/∂T)_p, enabling potentiometric determination of reaction enthalpy via the Gibbs-Helmholtz relation Δ_r H = - n F E + n F T (∂E/∂T)_p.

01

Gibbs Free Energy and Maximum Electrical Work

The maximum electrical work of a reversible cell equals the Gibbs energy decrease: ΔrG = −W_max = −nFE_cell, and at standard conditions ΔrG° = −nFE°cell = −2.303 RT log Kc. E°cell is intensive (independent of scale) while ΔrG is extensive (scales with moles).

Key Idea
ΔG = −nFE links cell potential to spontaneity; E° is intensive but ΔG is extensive.
Why It Works
Electrical work is charge (nF) times potential (E), and a reversible cell delivers this work by decreasing the system's free energy; doubling the reaction doubles n and ΔG but leaves E unchanged because potential is a per-electron intensity.
Boundary Trap
Adding half-cell E° values directly when combining reactions; one must add ΔG values (E°3 = (n1E°1 + n2E°2)/n3).
Application Note
For the Daniell cell, ΔrG° = −2 × 96500 × 1.10 = −212.3 kJ mol−1.
Authoritative Anchor
NCERT emphasises ΔG = −nFE and that multiplying a reaction by 2 doubles ΔG° but leaves E°cell unchanged.
🔬 VIRTUAL LAB Galvanic Cell Emf
Full Stage ↗
? Quick Concept Check

A cell has E_cell = +0.5 V; is its ΔG positive or negative?

Answer: Negative, because ΔG = −nFE < 0.

02

Temperature Coefficient, Entropy and Enthalpy

The temperature coefficient of cell EMF gives the reaction entropy: ΔrS = nF(∂E/∂T)_p, and the Gibbs–Helmholtz relation gives enthalpy: ΔrH = −nFE + nFT(∂E/∂T)_p. A cell whose EMF rises with temperature has a positive ΔS.

Key Idea
ΔS = nF(∂E/∂T)_p — the slope of E versus T reveals reaction entropy, which then yields ΔH.
Why It Works
Since ΔG = −nFE and (∂G/∂T)_p = −S, differentiating −nFE with respect to T isolates ΔS; combining this with ΔG = ΔH − TΔS gives the enthalpy via the Gibbs–Helmholtz relation.
Boundary Trap
Mishandling the sign — a positive temperature coefficient means a positive entropy change, not a negative one.
Application Note
If (∂E/∂T)_p = +1.0 × 10−4 V K−1 for a 2-electron cell, ΔS = 2 × 96500 × 1.0 × 10−4 = +19.3 J K−1 mol−1.
Authoritative Anchor
NCERT shows how the temperature coefficient of EMF is used to determine ΔS and ΔH of a cell reaction potentiometrically.
🔬 VIRTUAL LAB Galvanic Cell Emf
Full Stage ↗
? Quick Concept Check

What does a positive (∂E/∂T)_p imply about ΔrS?

Answer: ΔrS is positive.

04

Electrolytic Conductance, Molar Conductivity & Kohlrausch's Law

2 concepts · Foundational
2 nodes

Why does specific conductivity (κ) decrease upon dilution while molar conductivity (Λm) increases, how does Debye-Hückel-Onsager describe strong electrolytes, and how does Kohlrausch's law calculate Λ°m for weak acids?

Electrolytic solutions conduct electricity via ionic migration. Conductance G = 1/R; Conductivity κ = (1/R) · (l/A) = G · G*, where G* = l/A is the cell constant. Molar Conductivity Λm = (κ × 1000) / M represents the conducting power of all ions produced by dissolving 1 mole of electrolyte. Upon dilution, conductivity κ DECREASES because the number of ions per unit volume drops; however, molar conductivity Λm INCREASES because the vast increase in dilution volume more than compensates for the drop in κ. For strong electrolytes, Λm follows the Debye-Hückel-Onsager equation: Λm = Λ°m - A √c (linear decrease due to interionic drag). For weak electrolytes, Λm increases steeply near zero concentration due to surge in degree of dissociation (α). Kohlrausch's Law of Independent Migration states: Λ°m = ν+ λ°+ + ν- λ°-, enabling precise determination of Λ°m, α = Λm/Λ°m, and Ka for weak electrolytes like acetic acid.

01

Conductivity, Cell Constant and Molar Conductivity

Conductance G = 1/R, and conductivity κ = G × (l/A) = G × G*, where the cell constant G* = l/A. Molar conductivity Λm = (κ × 1000)/M (in S cm2 mol−1) is the conducting power of the ions produced by one mole of electrolyte.

Key Idea
κ = G·G* and Λm = 1000κ/M; on dilution κ decreases but Λm increases.
Why It Works
Dilution spreads ions into a larger volume, so fewer ions per unit volume reduce κ; but Λm, normalised per mole of electrolyte, rises because ions separate and move more freely (and for weak electrolytes, dissociate more).
Boundary Trap
Measuring electrolyte resistance with DC, which causes electrolysis and electrode polarisation; AC must be used.
Application Note
For 0.1 M KCl, if κ = 0.0112 S cm−1 then Λm = (0.0112 × 1000)/0.1 = 112 S cm2 mol−1.
Authoritative Anchor
NCERT stresses the 1000 factor in Λm = 1000κ/M and defines the cell constant from a standard KCl solution of known conductivity.
🔬 VIRTUAL LAB Galvanic Cell Emf
Full Stage ↗
? Quick Concept Check

Why must electrolyte resistance be measured with AC rather than DC?

Answer: DC causes electrolysis and electrode polarisation.

02

Kohlrausch's Law, Degree of Dissociation and Ka

Kohlrausch's law of independent migration states Λ°m = ν+λ°+ + ν−λ°−, so a weak electrolyte's limiting molar conductivity is found by combining strong electrolytes. The degree of dissociation α = Λm/Λ°m, and Ka = Cα2/(1−α).

Key Idea
Λ°m = ν+λ°+ + ν−λ°−; for a weak acid, α = Λm/Λ°m and Ka follow from this law.
Why It Works
At infinite dilution ions migrate independently, so limiting conductivities are additive; since weak acids never fully dissociate, their Λ°m is obtained indirectly and α is inferred from how far Λm falls below Λ°m.
Boundary Trap
Writing α = Λ°m/Λm (inverted); the correct ratio is α = Λm/Λ°m, which is always ≤ 1.
Application Note
Λ°m(CH3COOH) = Λ°m(CH3COONa) + Λ°m(HCl) − Λ°m(NaCl).
Authoritative Anchor
NCERT uses Kohlrausch's law to determine Λ°m and hence the Ka of weak electrolytes like acetic acid.
🔬 VIRTUAL LAB Electrochemical Nernst
Full Stage ↗
? Quick Concept Check

Express Λ°m of acetic acid using strong electrolytes.

Answer: Λ°m(CH3COOH) = Λ°m(CH3COONa) + Λ°m(HCl) − Λ°m(NaCl).

05

Electrolysis Mechanics, Faraday's Laws & Overpotential Kinetics

2 concepts · Foundational
2 nodes

How do Faraday's quantitative laws govern electrolytic deposition, why does kinetic overpotential cause Cl2 to evolve instead of O2 during brine electrolysis, and how do active versus inert electrodes alter products?

Electrolysis uses external electrical energy to drive non-spontaneous redox reactions in an electrolytic cell. Faraday's 1st Law states that mass deposited is proportional to charge passed: w = Z · Q = Z · I · t, where Z = M / (n · 96500) is the electrochemical equivalent. Faraday's 2nd Law states that when the same quantity of electricity passes through different electrolytes in series, masses deposited are proportional to their equivalent weights: w1/w2 = E1/E2. During electrolysis of aqueous solutions, multiple competing species can discharge. Although thermodynamic reduction potentials predict that oxidation of water to O2 (E° = +1.23 V) should occur before oxidation of Cl- to Cl2 (E° = +1.36 V), kinetic overvoltage for oxygen evolution is extraordinarily high, causing chlorine gas to evolve preferentially at the anode in brine electrolysis.

01

Faraday's Laws of Electrolysis

Faraday's first law: mass deposited w = Z·Q = Z·I·t, where the electrochemical equivalent Z = M/(n × 96500). Faraday's second law: for the same charge passed through different electrolytes in series, w1/w2 = E1/E2 (the equivalent weights).

Key Idea
w = Z·I·t with Z = M/nF; equal charge deposits masses proportional to equivalent weights.
Why It Works
Each electron reduces a fixed amount of substance, so total mass is proportional to total charge passed; the charge needed per mole scales with n (electrons per ion), making deposited mass proportional to M/n, the equivalent weight.
Boundary Trap
Using atomic mass M instead of equivalent weight M/n when applying Faraday's second law.
Application Note
Depositing 1 mol Cu (Cu2+, n = 2) needs 2 × 96500 C; 0.5 A for 19300 s passes 9650 C and deposits 0.05 mol Cu.
Authoritative Anchor
NCERT defines one Faraday as 96500 C (charge of one mole of electrons) and links it to w = ZIt.
🔬 VIRTUAL LAB Electrolysis Faraday
Full Stage ↗
? Quick Concept Check

How many coulombs deposit one mole of Al3+?

Answer: 3 × 96500 = 289500 C.

02

Overpotential and Selective Discharge

During brine electrolysis, Cl2 evolves at the anode instead of O2 because O2 evolution has a large kinetic overpotential, even though water oxidation (E° = +1.23 V) is thermodynamically favoured over Cl− oxidation (E° = +1.36 V). The electrode material (active vs inert) also changes the products.

Key Idea
High O2 overpotential lets Cl2 form at the anode despite its less favourable E°.
Why It Works
Thermodynamic E° predicts feasibility, but the extra voltage (overpotential) needed to break the strong O–H bonds and form O2 slows oxygen evolution, so the kinetically faster Cl− oxidation wins at the anode.
Boundary Trap
Predicting the anode product purely from E° values while ignoring overpotential.
Application Note
Electrolysis of aqueous CuSO4 with Pt electrodes gives Cu at the cathode and O2 at the anode; with Cu electrodes the Cu anode dissolves and [Cu2+] stays constant.
Authoritative Anchor
NCERT highlights that overpotential makes Cl2 (not O2) the anodic product in aqueous NaCl electrolysis and distinguishes active from inert electrodes.
🔬 VIRTUAL LAB Electrolysis Faraday
Full Stage ↗
? Quick Concept Check

Which gas forms at the anode of aqueous NaCl electrolysis, and why?

Answer: Cl2, because O2 evolution has a large overpotential.

06

Commercial Batteries, H2-O2 Fuel Cells & Corrosion Electrochemistry

2 concepts · Foundational
2 nodes

How do primary batteries differ from secondary batteries, why does a mercury cell maintain a strictly constant voltage, how does an H2-O2 fuel cell attain 70% efficiency, and what is the electrochemical mechanism of iron rusting?

Commercial batteries package electrochemical cells for portable energy. Primary batteries (dry cell, mercury cell) cannot be recharged; the mercury cell (Zn(Hg) + HgO -> ZnO + Hg) maintains a completely constant 1.35 V potential because its overall reaction involves no dissolved ions. Secondary batteries (lead-acid storage, Ni-Cd) are rechargeable via reverse DC current. The lead-acid accumulator (12 V) utilizes a spongy Pb anode, PbO2 cathode, and 38% H2SO4; upon discharge, both plates convert to insoluble PbSO4(s) while H2SO4 is consumed, lowering electrolyte density from 1.30 to <1.20 g/mL. Fuel cells convert chemical combustion energy directly into electricity without thermal intermediates, attaining ~70% thermodynamic efficiency in the Apollo space program (2 H2 + O2 -> 2 H2O). Corrosion of iron is an electrochemical phenomenon where anodic pits (Fe -> Fe2+ + 2e-) couple with air-water cathodic sites (O2 + 4H+ + 4e- -> 2 H2O) to form rust, Fe2O3·xH2O, preventable via sacrificial galvanization (Zn) or cathodic magnesium anodes.

01

Primary versus Secondary Batteries

Primary batteries (Leclanché dry cell, mercury cell) are non-rechargeable; the mercury cell keeps a constant 1.35 V because its reaction involves no dissolved ions. Secondary batteries (lead-acid, Ni–Cd) are rechargeable by applying a reverse current.

Key Idea
The mercury cell holds a constant 1.35 V (no ionic species); the lead-acid cell is recharged by reversed DC.
Why It Works
In the mercury cell every reactant and product (Zn(Hg), HgO, ZnO, Hg) has fixed unit activity, so the Nernst term never shifts; in a lead-acid cell, charging reverses the discharge reaction to regenerate Pb, PbO2 and H2SO4.
Boundary Trap
Assuming all cells can be recharged — primary-cell reactions are effectively irreversible.
Application Note
Lead-acid: Pb + PbO2 + 2H2SO4 ⇌ 2PbSO4 + 2H2O, with 38% H2SO4 of density 1.30 g/mL.
Authoritative Anchor
NCERT contrasts primary and secondary cells and explains the mercury cell's constant voltage and the lead-acid accumulator.
🔬 VIRTUAL LAB Electrochemical Nernst
Full Stage ↗
? Quick Concept Check

Why does the mercury cell maintain a constant 1.35 V?

Answer: Its reaction involves no dissolved ions, so concentrations never change.

02

Fuel Cells and Corrosion of Iron

An H2–O2 fuel cell converts combustion energy directly to electricity (2H2 + O2 → 2H2O) at about 70% efficiency, powering the Apollo spacecraft and providing drinking water. Rusting is electrochemical: anodic Fe → Fe2+ + 2e− couples with cathodic O2 + 4H+ + 4e− → 2H2O to form Fe2O3·xH2O.

Key Idea
Fuel cells bypass thermal losses (~70% efficient); rusting needs both O2 and liquid water, with iron acting as the anode.
Why It Works
Fuel cells avoid the Carnot limit of heat engines by converting chemical energy directly into electrical work; rusting requires both O2 and a water film (H2CO3 from dissolved CO2) because the cathodic O2 reduction consumes H+.
Boundary Trap
Believing iron rusts in dry oxygen — a liquid water film (with dissolved O2 and CO2) is essential for the cathodic reaction.
Application Note
Sacrificial galvanization: Zn (E° = −0.76 V) oxidises preferentially, protecting iron (E° = −0.44 V).
Authoritative Anchor
NCERT explains the H2–O2 fuel cell's 70% efficiency and the anodic/cathodic mechanism of iron corrosion along with its prevention.
🔬 VIRTUAL LAB Electrochemical Nernst
Full Stage ↗
? Quick Concept Check

Why does galvanised (Zn-coated) iron resist rusting?

Answer: Zinc acts as a sacrificial anode and oxidises in place of iron.