Trace it. Derive it. Know it.
Every cluster below maps one schematic path β from first principles to the final equation. Expand a node to follow the full derivation trace.
Rate of Change of Quantities, Chain Rate Modeling & Related Rates
3 concepts Β· CoreHow does the derivative quantify instantaneous rates of change in geometry, physics, and economics using the chain rule?
The derivative dy/dx measures the instantaneous rate of change of y with respect to x. When two related variables change with time, their rates are governed by the chain rule: dy/dt = (dy/dx) * (dx/dt).
Instantaneous Rate of Change: dy/dx & dy/dt
If a quantity y depends on x according to y = f(x), the derivative dy/dx = f'(x) represents the instantaneous rate of change of y with respect to x. When both x and y vary with time t, their rates are related by the chain rule: dy/dt = (dy/dx) * (dx/dt).
Related Rates in Geometric Constraints (Cones, Ladders & Shadows)
In related rates problems, geometric theorems (Pythagoras theorem, similar triangles) couple the variables. Differentiate the geometric constraint with respect to time t to link the rates of change.
Marginal Cost, Marginal Revenue & Economic Derivatives
In economics: Marginal Cost (MC) is the instantaneous rate of change of total cost C(x) with respect to output x: MC = dC/dx. Marginal Revenue (MR) is the instantaneous rate of change of total revenue R(x): MR = dR/dx.
Increasing and Decreasing Functions, Monotonicity Criteria & Sign Charts
3 concepts Β· CoreHow does the algebraic sign of the first derivative determine where a curve rises, falls, or remains strictly monotonic?
Monotonicity is governed strictly by the sign of the first derivative: f'(x) > 0 implies strictly increasing, while f'(x) < 0 implies strictly decreasing. Partitioning intervals with sign charts isolates monotonic behavior.
Strictly Increasing vs Increasing: Formal Definitions
Let f be defined on an interval I. For all x1, x2 in I with x1 < x2: (1) f is INCREASING if f(x1) <= f(x2); (2) f is STRICTLY INCREASING if f(x1) < f(x2); (3) f is DECREASING if f(x1) >= f(x2); (4) f is STRICTLY DECREASING if f(x1) > f(x2).
The First Derivative Sign Test & Wavy Curve Method
Let f be continuous on [a, b] and differentiable on (a, b): (1) If f'(x) > 0 for all x in (a, b), f is strictly increasing on [a, b]; (2) If f'(x) < 0 for all x in (a, b), f is strictly decreasing on [a, b]; (3) If f'(x) = 0, f is constant.
Monotonicity with Trigonometric & Transcendental Functions
When analyzing functions with trigonometric, exponential, or logarithmic components, find critical points within restricted domain periods (e.g. [0, 2 pi]) and evaluate derivative signs carefully.
Tangents and Normals to Curves, Slopes & Orthogonal Trajectories
3 concepts Β· CoreHow do we write the equations of tangent lines and orthogonal normal lines to arbitrary curves at specified coordinates?
The derivative f'(x0) provides the exact slope of the tangent line at P(x0, y0). The normal is perpendicular to the tangent, possessing slope -1/f'(x0). Two intersecting curves are orthogonal if m1 * m2 = -1.
Tangent Slope & Point-Slope Equation: y - y0 = f'(x0)(x - x0)
The slope of the tangent to curve y = f(x) at point P(x0, y0) is m = [dy/dx]_{(x0, y0)} = f'(x0). The Cartesian equation of the tangent line is y - y0 = m (x - x0).
Normal Line Slope & Equation: Perpendicularity Condition
The normal line is perpendicular to the tangent line at the point of contact. Its slope is m_normal = -1 / m_tangent = -1 / f'(x0), provided f'(x0) != 0. The equation of the normal is y - y0 = (-1 / f'(x0)) (x - x0).
Orthogonal Trajectories & Angle of Intersection of Curves
The angle theta between two intersecting curves is the acute angle between their tangent lines at the point of intersection: tan theta = |(m1 - m2) / (1 + m1 m2)|. Two curves are ORTHOGONAL (intersect at right angles) if and only if m1 * m2 = -1 at their common intersection point.
Approximations using Differentials, Relative & Percentage Error Propagation
2 concepts Β· CoreHow do differentials project tangent slopes to rapidly estimate fractional roots and physical error propagation?
Differentials provide a powerful linear approximation framework: f(x + Delta x) approx f(x) + f'(x) Delta x. This enables rapid estimation of roots and evaluation of error propagation in physical measurements.
Differentials: dx, dy and The Linearization Formula
The differential of independent variable x is dx = delta x. The differential of dependent variable y is dy = f'(x) dx. The approximation formula is f(x + delta x) ~= f(x) + dy = f(x) + f'(x) delta x.
Absolute, Relative, and Percentage Errors in Measurements
If delta x is the measurement error in x: (1) Absolute error = delta x; (2) Relative error = delta x / x; (3) Percentage error = (delta x / x) * 100. The propagated error in y = f(x) is delta y ~= f'(x) delta x.
Maxima and Minima: Critical Points, First Derivative Test & Second Derivative Test
4 concepts Β· CoreHow do first and second derivatives locate and classify local peaks, local valleys, and points of inflection?
Local extrema occur exclusively at critical points (where f'(c) = 0 or f'(c) is undefined). The first derivative test inspects sign transitions, while the second derivative test diagnoses curvature (f'' < 0 for max, f'' > 0 for min).
Critical Points Definition: f'(c) = 0 or f' Undefined
A point c in the domain of f is called a CRITICAL POINT if either f'(c) = 0 or f is not differentiable at c. Local extrema can occur ONLY at critical points (Fermat's Theorem).
The First Derivative Test for Local Extrema
Let c be a critical point of continuous function f: (1) If f'(x) changes sign from POSITIVE to NEGATIVE as x increases through c, c is a point of LOCAL MAXIMUM; (2) If f'(x) changes sign from NEGATIVE to POSITIVE, c is a point of LOCAL MINIMUM; (3) If f'(x) does not change sign, c is a POINT OF INFLECTION.
The Second Derivative Test & Concavity Criterion
Let c be a critical point where f'(c) = 0 and f'' is continuous: (1) If f''(c) < 0, f has a LOCAL MAXIMUM at c (concave downward); (2) If f''(c) > 0, f has a LOCAL MINIMUM at c (concave upward); (3) If f''(c) = 0, the test is INCONCLUSIVE (must use first derivative test).
Absolute Maxima and Minima on Closed Intervals [a, b]
The ABSOLUTE (Global) maximum and minimum of a continuous function f on a closed interval [a, b] always exist by the Extreme Value Theorem. To find them: (1) Find all critical points in (a, b), (2) Evaluate f at all critical points AND at the two endpoints a and b, (3) The largest value is the absolute maximum, and the smallest is the absolute minimum.
Absolute Extrema on Closed Intervals and Applied Geometric Optimization
3 concepts Β· CoreHow do we model real-world geometric and industrial problems into single-variable calculus functions to maximize profit or minimize material?
The Extreme Value Theorem guarantees absolute maximum and minimum values on closed intervals [a, b]. Applied optimization translates physical and geometric constraints into single-variable calculus extremum problems.
Formulating the Objective Function & Eliminating Variables
In applied optimization: (1) Identify the primary quantity Z to optimize (volume, area, cost, distance); (2) Identify the constraint relating dimensions (e.g. surface area S = 2 pi r^2 + 2 pi r h = constant); (3) Use the constraint to eliminate one variable, expressing Z as Z(x) in a single variable.
Second Derivative Verification in Optimization Proofs
Finding the critical point via dZ/dx = 0 is only half the problem; you must mathematically confirm its nature using the second derivative test: d^2Z/dx^2 < 0 confirms MAXIMUM, while d^2Z/dx^2 > 0 confirms MINIMUM.
Classic Geometric Archetypes: Inscribed Solids & Angle Proofs
Standard competitive archetypes include: (1) Cylinder of maximum volume in a sphere of radius R has height h = 2R/sqrt(3); (2) Cone of maximum volume in a sphere has altitude h = 4R/3; (3) Semi-vertical angle of cone of maximum volume with given slant height is tan^(-1)(sqrt(2)).