EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

⚡ INTEGRATED VIRTUAL LABORATORIES (9)
Open Subject Labs Catalog ↗
Best Fit Line And Error
Stage ↗
Dimensional Formula
Stage ↗
Dimensional Formulae And Dimensional Equations
Stage ↗
Error Propagation
Stage ↗
Significant Figures And Rounding
Stage ↗
Significant Figures
Stage ↗
The International System Of Units
Stage ↗
Unit Conversion And Prefix
Stage ↗
Vernier Caliper And Screw Gauge Reading
Stage ↗
01

Physical Quantities & SI Units

2 concepts · Foundational
2 nodes
01

Physical Quantities & SI Units

The seven SI base quantities are length, mass, time, electric current, thermodynamic temperature, amount of substance and luminous intensity. Force, pressure and work are all derived quantities built from these base quantities.

Key Idea
A base quantity is one whose unit is defined independently; a derived quantity is formed by combining base quantities.
Boundary Trap
Assuming every familiar quantity (force, pressure, work) is fundamental; only the seven base quantities hold that status.
Application Note
Electric current is a base quantity, whereas force (mass × acceleration) is derived from mass, length and time.
🔬 VIRTUAL LAB The International System Of Units
Full Stage ↗
? Quick Concept Check

Which of the following is a derived quantity?

Answer: Velocity

02

Physical Quantities & SI Units — Numerical & Application

SI defines exactly seven base quantities: length, mass, time, electric current, thermodynamic temperature, amount of substance and luminous intensity.

Key Idea
The SI has seven base units, each tied to a base quantity.
Boundary Trap
Guessing 3 (only M, L, T) and forgetting electric current, temperature, amount of substance and luminous intensity are also base quantities.
Application Note
The seven base units are metre, kilogram, second, ampere, kelvin, mole and candela.
🔬 VIRTUAL LAB The International System Of Units
Full Stage ↗
? Quick Concept Check

How many supplementary units (plane angle and solid angle) are defined in SI?

Answer: 2

02

The International System Of Units

2 concepts · Foundational
2 nodes
01

The International System Of Units

The SI base unit of mass is the kilogram (kg). The gram is a prefixed submultiple (10⁻³ kg), the newton is the derived unit of force, and the pound is an imperial unit.

Key Idea
The SI base unit of mass is the kilogram; 1 kg = 1000 g.
Boundary Trap
Choosing the gram as the base unit; the kilogram, not the gram, is the official SI base unit of mass.
Application Note
A mass of 2.5 kg equals 2500 g, but the kilogram remains the base unit in SI.
🔬 VIRTUAL LAB The International System Of Units
Full Stage ↗
? Quick Concept Check

The radian and steradian are the SI units of plane angle and solid angle respectively. They are best classified as:

Answer: supplementary units that are dimensionless

02

The International System Of Units — Numerical & Application

The prefix micro (µ) means 10⁻⁶. Thus 1 micrometre = 10⁻⁶ m and 1 microgram = 10⁻⁶ g.

Key Idea
micro (µ) = 10⁻⁶; milli (m) = 10⁻³; nano (n) = 10⁻⁹; giga (G) = 10⁹.
Boundary Trap
Swapping micro (10⁻⁶) with milli (10⁻³) or nano (10⁻⁹).
Application Note
A wavelength of 500 nm = 500 × 10⁻⁹ m = 5 × 10⁻⁷ m.
🔬 VIRTUAL LAB The International System Of Units
Full Stage ↗
? Quick Concept Check

The SI prefix 'giga' (symbol G) multiplies a unit by which factor?

Answer: 10⁹

03

Significant Figures

2 concepts · Foundational
2 nodes
01

Significant Figures

Leading zeros are not significant. The digits 3, 0, 4 and the trailing 0 (after the decimal point) are significant, giving 4 significant figures.

Key Idea
All non-zero digits and any zeros between them or after the decimal point are significant; leading zeros are not.
Boundary Trap
Counting leading zeros (0.00) as significant; they only locate the decimal point.
Application Note
0.003040 has 4 significant figures: 3, 0, 4 and the final 0.
🔬 VIRTUAL LAB Significant Figures And Rounding
Full Stage ↗
? Quick Concept Check

How many significant figures are present in 200.0?

Answer: 4

02

Significant Figures — Numerical & Application

For addition and subtraction the result is rounded to the least number of decimal places among the terms. The significant-figure rule applies only to multiplication and division.

Key Idea
Add/subtract: keep the least number of decimal places. Multiply/divide: keep the least number of significant figures.
Boundary Trap
Using the 'least significant figures' rule for addition; that rule is for multiplication/division.
Application Note
12.34 + 1.2 = 13.5 (rounded to one decimal place, matching 1.2).
🔬 VIRTUAL LAB Significant Figures And Rounding
Full Stage ↗
? Quick Concept Check

When two measured numbers are multiplied, the result should retain:

Answer: the least number of significant figures

04

Dimensions Of Physical Quantities

2 concepts · Foundational
2 nodes
01

Dimensions Of Physical Quantities

Force = mass × acceleration = M × (L T⁻²) = [M L T⁻²].

Key Idea
force = mass × acceleration = [M][L T⁻²] = [M L T⁻²].
Boundary Trap
Confusing force [M L T⁻²] with pressure [M L⁻¹ T⁻²] or energy [M L² T⁻²].
Application Note
1 N = 1 kg·m·s⁻² carries dimension [M L T⁻²].
🔬 VIRTUAL LAB Best Fit Line And Error
Full Stage ↗
? Quick Concept Check

The dimensional formula of work (or energy) is:

Answer: [M L² T⁻²]

02

Dimensions Of Physical Quantities — Numerical & Application

All mechanical quantities can be expressed using three fundamental dimensions: mass (M), length (L) and time (T).

Key Idea
Mechanics uses exactly three fundamental dimensions: M, L and T.
Boundary Trap
Forgetting that mechanics needs only M, L and T (a fourth dimension is not required until electromagnetism or thermodynamics is involved).
Application Note
Speed [L T⁻¹], force [M L T⁻²] and energy [M L² T⁻²] all reduce to M, L and T.
🔬 VIRTUAL LAB Best Fit Line And Error
Full Stage ↗
? Quick Concept Check

Which set lists the three fundamental dimensions used in mechanics?

Answer: M, L, T

05

Dimensional formulae And Dimensional Equations

2 concepts · Foundational
2 nodes
01

Dimensional formulae And Dimensional Equations

From F = G m₁ m₂ / r², G = F r² / (m₁ m₂) = [M L T⁻²]·[L²] / [M²] = [M⁻¹ L³ T⁻²].

Key Idea
G = F r² / (m₁ m₂) = [M L T⁻²][L²]/[M²] = [M⁻¹ L³ T⁻²].
Boundary Trap
Getting the sign of the mass exponent wrong; G has M⁻¹ (mass appears in the denominator).
Application Note
G appears in the denominator of the mass product, hence the negative exponent on M.
🔬 VIRTUAL LAB Dimensional Formula
Full Stage ↗
? Quick Concept Check

The dimensional formula of Planck's constant (h) is:

Answer: [M L² T⁻¹]

02

Dimensional formulae And Dimensional Equations — Numerical & Application

From Coulomb's law F = q₁q₂/(4πε₀ r²), ε₀ = q²/(4π F r²). With q = [A T], ε₀ = [A² T²]/([M L T⁻²][L²]) = [M⁻¹ L⁻³ T⁴ A²].

Key Idea
ε₀ = q²/(4π F r²) = [A² T²]/([M L T⁻²][L²]) = [M⁻¹ L⁻³ T⁴ A²].
Boundary Trap
Forgetting that electric charge has dimension [A T] (current × time), not just [A].
Application Note
The T⁴ term arises because q carries a T in its dimension.
🔬 VIRTUAL LAB Dimensional Formula
Full Stage ↗
? Quick Concept Check

The dimensional formula of the permeability of free space (μ₀) is:

Answer: [M L T⁻² A⁻²]

06

Dimensional Analysis And Its Applications

2 concepts · Foundational
2 nodes
01

Dimensional Analysis And Its Applications

A physical equation is dimensionally consistent only if every term being added or equated has identical dimensions.

Key Idea
In a valid equation all additive terms share one dimension.
Boundary Trap
Thinking only the left and right sides must match; every term within a sum must also share the same dimensions.
Application Note
In s = ut + ½at², every term has dimension [L].
🔬 VIRTUAL LAB Dimensional Formula
Full Stage ↗
? Quick Concept Check

Which two quantities can be added directly in a physical equation?

Answer: work and energy

02

Dimensional Analysis And Its Applications — Numerical & Application

1 J = 1 kg·m²·s⁻² = (10³ g)(10² cm)²·s⁻² = 10³ × 10⁴ = 10⁷ g·cm²·s⁻² = 10⁷ erg.

Key Idea
1 J = 10⁷ erg and 1 N = 10⁵ dyne.
Boundary Trap
Confusing the conversion with 1 N = 10⁵ dyne; energy (J→erg) is 10⁷, force (N→dyne) is 10⁵.
Application Note
The extra 10² comes from squaring the length conversion.
🔬 VIRTUAL LAB Dimensional Formula
Full Stage ↗
? Quick Concept Check

1 newton is equal to how many dynes?

Answer: 10⁵