EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

⚡ INTEGRATED VIRTUAL LABORATORIES (5)
Open Subject Labs Catalog ↗
Acceleration
Stage ↗
Instantaneous Velocity And Speed
Stage ↗
Kinematic Equations
Stage ↗
Kinematic Equations For Uniformly Accelerated Motion
Stage ↗
Motion Graph
Stage ↗
01

Position, Path Length & Displacement

2 concepts · Foundational
2 nodes
01

Position, Path Length & Displacement

Displacement is the net change in position, Δx = x_final - x_initial = (-2 m) - (3 m) = -5 m, i.e. 5 m in the negative x direction. It depends only on the endpoints, not the path taken.

Key Idea
Displacement Δx = x_final - x_initial is a vector with both magnitude and direction; its magnitude can never exceed the total path length (distance).
Boundary Trap
Confusing distance (total scalar path length) with displacement (net vector change in position); remember distance is always greater than or equal to the magnitude of displacement.
Application Note
Use Δx = x_final - x_initial whenever you need the net change in position between two instants, ignoring the actual route the body took.
🔬 VIRTUAL LAB Acceleration
Full Stage ↗
? Quick Concept Check

A particle travels 4 m east and then 3 m west along a straight line. What are the distance travelled and the displacement?

Answer: distance 7 m, displacement 1 m east

02

Position, Path Length & Displacement — Numerical & Application

Distance is the total path length 5 + 12 = 17 m. Displacement is the net change 12 - 5 = 7 m towards the south, so its magnitude is 7 m.

Key Idea
Distance = sum of path lengths (scalar, always non-negative); displacement = net change in position (vector). For opposite legs, subtract; for same-direction legs, add.
Boundary Trap
Confusing distance with displacement when the path reverses direction; distance is greater than or equal to the magnitude of displacement, with equality only for straight unidirectional motion.
Application Note
For any back-and-forth motion, compute distance by adding every segment and displacement by taking the net (signed) sum along the axis.
🔬 VIRTUAL LAB Acceleration
Full Stage ↗
? Quick Concept Check

A runner completes one full lap around a 400 m circular track. What are the distance travelled and the displacement?

Answer: distance 400 m, displacement 0 m

02

Instantaneous Velocity And Speed

2 concepts · Foundational
2 nodes
01

Instantaneous Velocity And Speed

Instantaneous velocity is the time derivative of position: v = dx/dt = d(5 + 2t + t²)/dt = 0 + 2 + 2t = 2 + 2t.

Key Idea
Instantaneous velocity v = dx/dt is the derivative of position with respect to time; constants differentiate to zero and powers bring down their exponent.
Boundary Trap
Confusing instantaneous speed with instantaneous velocity (which carries direction); instantaneous speed is always the magnitude |dx/dt|, a non-negative quantity.
Application Note
Differentiate x(t) to obtain v(t), then substitute any specific value of t to find the velocity at that instant.
🔬 VIRTUAL LAB Instantaneous Velocity And Speed
Full Stage ↗
? Quick Concept Check

The position of a particle is x(t) = 4t³ (metres). What is its instantaneous velocity at t = 2 s?

Answer: 48 m/s

02

Instantaneous Velocity And Speed — Numerical & Application

Velocity v = dx/dt = 6t² - 6t, and acceleration a = dv/dt = 12t - 6. At t = 2 s, a = 12(2) - 6 = 24 - 6 = 18 m/s².

Key Idea
Acceleration is the second derivative of position, a = d²x/dt² = dv/dt; use differentiation when the motion is not uniformly accelerated.
Boundary Trap
Applying kinematic formulas (v = u + at) when acceleration is non-constant; for time-varying acceleration you must differentiate instead.
Application Note
Differentiate x(t) twice to obtain a(t), then evaluate at the requested time to get the instantaneous acceleration.
🔬 VIRTUAL LAB Instantaneous Velocity And Speed
Full Stage ↗
? Quick Concept Check

A particle's velocity is v(t) = 4t + 1 (m/s). What is its acceleration?

Answer: 4 m/s²

03

Acceleration

2 concepts · Foundational
2 nodes
01

Acceleration

Acceleration is the rate of change of velocity, a = dv/dt, which is exactly the slope of the velocity-time graph at that instant.

Key Idea
The slope of a velocity-time graph equals the instantaneous acceleration, while the area under the curve equals displacement.
Boundary Trap
Confusing retardation (decreasing speed) with negative acceleration; retardation requires velocity and acceleration to have opposite signs (v·a < 0).
Application Note
Read acceleration from the slope of a v-t graph and displacement from its area; do not confuse slope with area.
🔬 VIRTUAL LAB Acceleration
Full Stage ↗
? Quick Concept Check

A velocity-time graph is a horizontal straight line above the time axis. What is the acceleration of the body?

Answer: Zero

02

Acceleration — Numerical & Application

Displacement equals the area under the velocity-time graph. The graph is a triangle of base 4 s and height 20 m/s, so area = (1/2) × base × height = (1/2) × 4 × 20 = 40 m.

Key Idea
Displacement = ∫ v dt = area under the v-t curve (algebraic, can be negative); distance travelled is the sum of the absolute areas.
Boundary Trap
Mistaking the area under an a-t graph for velocity instead of the change in velocity (Δv); the final velocity is v2 = v1 + Area, not Area alone.
Application Note
Compute areas of rectangles and triangles under v-t graphs to find displacement, keeping the sign for direction.
🔬 VIRTUAL LAB Acceleration
Full Stage ↗
? Quick Concept Check

The velocity-time graph of a particle is a rectangle of height 8 m/s extending from t = 0 to t = 3 s. What is the displacement?

Answer: 24 m

04

Kinematic Equations For Uniformly Accelerated Motion

2 concepts · Foundational
2 nodes
01

Kinematic Equations For Uniformly Accelerated Motion

Using v = u + at with u = 0 (starts from rest), a = 2 m/s² and t = 5 s: v = 0 + (2)(5) = 10 m/s.

Key Idea
For constant acceleration, v = u + at, s = ut + (1/2)at² and v² = u² + 2as; apply them only when acceleration is constant.
Boundary Trap
Applying kinematic equations (v = u + at, s = ut + (1/2)at²) when acceleration is not constant, or dropping sign conventions.
Application Note
Identify u, a and t, then select the kinematic equation that links the known quantities to the single unknown you need.
🔬 VIRTUAL LAB Kinematic Equations
Full Stage ↗
? Quick Concept Check

A body moving at 8 m/s accelerates uniformly at 2 m/s². What distance does it cover in 4 s?

Answer: 48 m

02

Kinematic Equations For Uniformly Accelerated Motion — Numerical & Application

At maximum height the velocity is momentarily zero. Using v² = u² - 2gH with v = 0 gives H = u²/(2g) = (20)²/(2 × 10) = 400/20 = 20 m.

Key Idea
For vertical projection, maximum height H = u²/(2g), total time of flight T = 2u/g, and time of ascent equals time of descent (u/g).
Boundary Trap
Forgetting sign conventions in free fall and vertical projection, or that stopping distance is proportional to u² (doubling the speed quadruples the distance).
Application Note
Set the final velocity to zero at the highest point, then solve the constant-acceleration equation v² = u² - 2gH for H.
🔬 VIRTUAL LAB Kinematic Equations
Full Stage ↗
? Quick Concept Check

A ball is thrown vertically upward with a speed of 20 m/s. What is its total time of flight before returning to the thrower's hand? (Take g = 10 m/s²)

Answer: 4 s