EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

⚡ INTEGRATED VIRTUAL LABORATORIES (10)
Open Subject Labs Catalog ↗
Collisions
Stage ↗
Energy Conservation Playground
Stage ↗
Kinetic Energy
Stage ↗
Momentum Collision
Stage ↗
Power Delivery
Stage ↗
Power
Stage ↗
Speed Vs Kinetic Energy
Stage ↗
The Conservation Of Mechanical Energy
Stage ↗
Work And Angle
Stage ↗
Work
Stage ↗
01

Work Done by a Constant Force

2 concepts · Foundational
2 nodes
01

Work Done by a Constant Force

Work done by a constant force is the scalar product W = F d cos θ = 10 × 4 × cos 60° = 40 × 0.5 = 20 J. Only the component of force along the displacement does work.

Key Idea
For a constant force, W = F d cos θ = F·d, where θ is always the angle between the force vector and the displacement vector.
Boundary Trap
Students frequently drop the cosine term and write W = F d = 40 J, or use sin 60° (giving 34.6 J). Work is a signed scalar governed by the projection cos θ, and the sign of work must be tracked whenever the force opposes the motion.
Application Note
Resolve either vector along the other and multiply by the cosine of the included angle; never use the complement or sine of the angle.
🔬 VIRTUAL LAB Work And Angle
Full Stage ↗
? Quick Concept Check

A force F = (3 î + 4 ĵ) N acts on a particle that undergoes a displacement d = (2 î) m. The work done by the force is:

Answer: 6 J

02

Work Done by a Constant Force — Numerical & Application

W = F·d = F_x d_x + F_y d_y = (5)(4) + (12)(3) = 20 + 36 = 56 J. Both components contribute because there is displacement along each axis.

Key Idea
For Cartesian vectors, W = F·d = F_x d_x + F_y d_y + F_z d_z; every component pair contributes additively.
Boundary Trap
A frequent trap is keeping only one component (e.g. F_x d_x = 20 J) and neglecting the second term. Work is a scalar sum over all components, W = F_x d_x + F_y d_y + F_z d_z.
Application Note
Multiply matching components and sum; a perpendicular component pair contributes zero, but never drop a non-zero pair.
🔬 VIRTUAL LAB Work And Angle
Full Stage ↗
? Quick Concept Check

Which pair of vectors is perpendicular to each other (i.e. has a scalar product of zero)?

Answer: 3 î + 4 ĵ and 4 î − 3 ĵ

02

Work

2 concepts · Foundational
2 nodes
01

Work

Gravity acts downward while the displacement is upward, so the angle between force and displacement is 180° and W = mg·d cos 180° = −mg·d, which is negative. Gravity extracts energy from the rising ball.

Key Idea
Work is positive for θ < 90°, zero for θ = 90°, and negative for θ > 90°; the sign reflects whether energy is added to or removed from the body.
Boundary Trap
The sign of work is a recurring negative-marking trap: when force and displacement oppose each other (θ = 180°), work is negative, not zero and not positive. Always check the relative direction of force and displacement.
Application Note
Determine the sign of work by inspecting the angle between the force and the displacement, not by the force's magnitude.
🔬 VIRTUAL LAB Work And Angle
Full Stage ↗
? Quick Concept Check

A block slides along a rough horizontal floor and gradually slows to rest. The work done by the kinetic friction force on the block is:

Answer: Negative

02

Work — Numerical & Application

The normal force equals mg = 20 N, so friction f = μmg = 0.2 × 20 = 4 N. Friction opposes motion, so W = −f d = −4 × 3 = −12 J.

Key Idea
Kinetic friction does negative work W = −μ m g d on a level surface, because friction always opposes the direction of motion.
Boundary Trap
The negative sign is the trap: friction opposes the displacement, so its work is −f d. Students who drop the sign (writing +12 J) or who forget to multiply by μ (getting −60 J) lose marks.
Application Note
Compute the friction magnitude f = μmg (on a horizontal surface), then attach a negative sign and multiply by the sliding distance.
🔬 VIRTUAL LAB Work And Angle
Full Stage ↗
? Quick Concept Check

A 5 kg object is lifted vertically upward through 2 m. Taking g = 10 m/s², the work done by the force of gravity is:

Answer: -100 J

03

Notions Of Work And Kinetic

2 concepts · Foundational
2 nodes
01

Notions Of Work And Kinetic

By the work-energy theorem, W_net = ΔK = F d = 10 × 5 = 50 J. Since the block starts from rest, the entire net work appears as kinetic energy.

Key Idea
The work-energy theorem states W_net = ΔK = ½ m v² − ½ m u²; for a body starting from rest under a constant net force, ΔK = F d.
Boundary Trap
Do not confuse net work with force: the gained kinetic energy equals F d (50 J), not F (10 N) and not 2Fd. Track the net force when applying W_net = ΔK.
Application Note
Use W_net = ΔK to connect force, displacement, and speed in one scalar step instead of solving kinematics with time.
🔬 VIRTUAL LAB Kinetic Energy
Full Stage ↗
? Quick Concept Check

A 2 kg block at rest is acted on by a net force of 8 N through a displacement of 2 m on a frictionless surface. Its final speed is:

Answer: 4 m/s

02

Notions Of Work And Kinetic — Numerical & Application

W_net = ΔK gives −F d = 0 − ½ m v², so F = m v² / (2 d) = 1000 × 100 / (2 × 25) = 2000 N.

Key Idea
For a body stopped by a constant retarding force, F = m v² / (2 d), derived directly from the work-energy theorem.
Boundary Trap
A common slip is using v² = u² + 2as with a wrong sign or forgetting the factor 2. The work-energy theorem handles the sign automatically via the negative work done by the retarding force.
Application Note
Use W_net = ΔK to relate braking force, initial speed, and stopping distance without computing acceleration or time.
🔬 VIRTUAL LAB Kinetic Energy
Full Stage ↗
? Quick Concept Check

A 10 g bullet moving at 400 m/s embeds itself in a wall and penetrates 10 cm before stopping. The average resistive force offered by the wall is:

Answer: 8000 N

04

Kinetic Energy

2 concepts · Foundational
2 nodes
01

Kinetic Energy

With equal momentum, K = p² / (2m) ∝ 1/m. The lighter body has 4 times the kinetic energy of the heavier body, so K_light : K_heavy = 4 : 1.

Key Idea
When momentum is fixed, K = p²/(2m) ∝ 1/m; when kinetic energy is fixed, p = √(2mK) ∝ √m.
Boundary Trap
Students often confuse the two invariance cases: equal momentum means K ∝ 1/m (lighter body has more KE), whereas equal kinetic energy means p ∝ √m (heavier body has more momentum).
Application Note
Identify which quantity is held constant before choosing between the two coupling rules between K and p.
🔬 VIRTUAL LAB Energy Conservation Playground
Full Stage ↗
? Quick Concept Check

The linear momentum of a body is doubled (increased by 100%). The percentage increase in its kinetic energy is:

Answer: 300%

02

Kinetic Energy — Numerical & Application

If p increases by 50%, p_f = 1.5 p_i. Since K ∝ p², K_f = (1.5)² K_i = 2.25 K_i, so the increase is 1.25 K_i = 125%. The finite ratio must be used for large changes, not the differential 2(dp/p).

Key Idea
K ∝ p², so K_f/K_i = (p_f/p_i)²; use this finite ratio for any percentage change larger than a few percent.
Boundary Trap
For percentage changes larger than a few percent you cannot use the small-change formula dK/K = 2 dp/p (which would give 100%). The finite relation K_f/K_i = (p_f/p_i)² gives 1.5² = 2.25, i.e. a 125% increase.
Application Note
Square the momentum scaling factor and subtract 1 to obtain the fractional (then percentage) increase in kinetic energy.
🔬 VIRTUAL LAB Energy Conservation Playground
Full Stage ↗
? Quick Concept Check

The kinetic energy of a body is doubled. The percentage increase in its linear momentum is:

Answer: 41.4%

05

Work Done By A Variable Force

2 concepts · Foundational
2 nodes
01

Work Done By A Variable Force

For a variable force, W = ∫ F(x) dx = ∫₀³ 2x dx = x² |₀³ = 9 − 0 = 9 J. This equals the area under the F-x graph.

Key Idea
Work done by a variable force F(x) is W = ∫ F(x) dx, equal to the area under the F-x curve between the two positions.
Boundary Trap
A variable force cannot be handled by simply writing W = F d with a single value of F. The work is the area under the F-x curve (the integral), not force times the full distance.
Application Note
Use integration (or the geometric area under the F-x graph) whenever the force depends on position, rather than a single W = F d.
🔬 VIRTUAL LAB Work And Angle
Full Stage ↗
? Quick Concept Check

A force increases uniformly from 0 to 10 N as a body is displaced from x = 0 to x = 2 m. The work done is:

Answer: 10 J

02

Work Done By A Variable Force — Numerical & Application

W = ∫₀² 3x² dx = x³ |₀² = 8 − 0 = 8 J.

Key Idea
For F(x) = k xⁿ, the work is W = k (x_f^{n+1} − x_i^{n+1}) / (n+1); here W = ∫ 3x² dx = x³ evaluated at the limits.
Boundary Trap
The trap is treating F as constant (e.g. using F = 3 N over 2 m to get 6 J, or F = 12 N to get 24 J). Because F depends on x, you must integrate and not pick a single representative force value.
Application Note
When the force is a power of position, integrate using the power rule and evaluate at the endpoints.
🔬 VIRTUAL LAB Work And Angle
Full Stage ↗
? Quick Concept Check

A spring of spring constant 100 N/m is stretched from its natural length by 0.2 m. The work done in stretching the spring is:

Answer: 2 J

06

The Work-Energy Theorem For A Variable Force

2 concepts · Foundational
2 nodes
01

The Work-Energy Theorem For A Variable Force

Instantaneous power is P = F · v = F v cos θ = 20 × 5 × cos 0° = 100 W.

Key Idea
Instantaneous power is P = F · v = F v cos θ; it equals the rate at which work is done (dW/dt) and the rate of change of kinetic energy (dK/dt).
Boundary Trap
Do not divide or square the force and velocity. Power is the product F v (with cos θ for the angle between them), not F/v (4 W) or F + v (25 W).
Application Note
Multiply the force by the velocity component parallel to it to obtain instantaneous power.
🔬 VIRTUAL LAB Collisions
Full Stage ↗
? Quick Concept Check

For a body under a net force, the instantaneous rate at which its kinetic energy changes is equal to:

Answer: The instantaneous power F · v

02

The Work-Energy Theorem For A Variable Force — Numerical & Application

W = ∫₀² 6x dx = 3x² |₀² = 3 × 4 = 12 J.

Key Idea
Work by a variable force is W = ∫ F(x) dx; for F = kx the result is ½ k x², and for F = 6x over 0 to 2 it is 12 J.
Boundary Trap
Do not use a single value of F (e.g. F = 6 N → 12 J coincidentally, or F = 12 N → 24 J). The force is position-dependent, so the work must be computed by integration over the displacement.
Application Note
Integrate the force over the displacement; the result is the change in kinetic energy of the body.
🔬 VIRTUAL LAB Collisions
Full Stage ↗
? Quick Concept Check

As a block slides to rest, the friction force does −50 J of work on it. The thermal (internal) energy generated is:

Answer: 50 J

07

The Concept Of Potential Energy

2 concepts · Foundational
2 nodes
01

The Concept Of Potential Energy

A defining property of a conservative force is that the work done around any closed path is exactly zero (∮ F · dr = 0), and the work between two points is independent of the path.

Key Idea
A conservative force is path-independent, does zero work around any closed loop, and possesses a potential energy U with W_c = −ΔU.
Boundary Trap
Confusing conservative and non-conservative forces is a common trap: for friction the closed-loop work is non-zero, but for gravity or a spring it is strictly zero.
Application Note
Test whether a force is conservative by checking if its work around a closed loop vanishes.
🔬 VIRTUAL LAB Energy Conservation Playground
Full Stage ↗
? Quick Concept Check

The work done by a conservative force in moving a particle from point A to point B depends on:

Answer: Only the initial and final positions

02

The Concept Of Potential Energy — Numerical & Application

At x = 0, dU/dx = 0 (so F = 0) and d²U/dx² = 2 > 0, which corresponds to a minimum of U and therefore stable equilibrium.

Key Idea
Equilibrium occurs where dU/dx = 0; it is stable, unstable, or neutral according as d²U/dx² is positive, negative, or zero.
Boundary Trap
A common trap is reading any point where dU/dx = 0 as stable. You must also check the sign of d²U/dx²: positive means stable (minimum), negative means unstable (maximum), zero means neutral.
Application Note
Classify equilibrium by inspecting the curvature (second derivative) of the potential-energy function at the equilibrium point.
🔬 VIRTUAL LAB Energy Conservation Playground
Full Stage ↗
? Quick Concept Check

A particle has potential energy U(x) = −x² J. At x = 0, the particle is in:

Answer: Unstable equilibrium

08

The Conservation Of Mechanical Energy

2 concepts · Foundational
2 nodes
01

The Conservation Of Mechanical Energy

By conservation of mechanical energy, E = mgH = K + U. When K = U, we have 2U = mgH, so mgh = mgH/2 and h = H/2.

Key Idea
For a body falling from height H, K(h) = mg(H − h) and U(h) = mgh; K = U occurs at h = H/2.
Boundary Trap
A common trap is guessing H/4 or 3H/4. Setting K = U at a height h gives mg(H − h) = mgh, which solves to h = H/2 exactly.
Application Note
Use energy conservation to relate speed and height at any point without solving the equations of motion.
🔬 VIRTUAL LAB Energy Conservation Playground
Full Stage ↗
? Quick Concept Check

A body is dropped from rest from a height H. Its speed just before striking the ground is:

Answer: √(2gH)

02

The Conservation Of Mechanical Energy — Numerical & Application

Using conservation of energy between the bottom and top, ½ m v_bot² = ½ m v_top² + mg(2R), and with v_top = √(gR), we get v_bot = √(5gR).

Key Idea
For a complete vertical circle with a string, the minimum speeds are v_top = √(gR) and v_bot = √(5gR).
Boundary Trap
A common trap is using v_top = √(gR) at the bottom. The bottom launch speed is √(5gR), obtained by adding the potential-energy gain mg(2R) between bottom and top.
Application Note
Combine the top-point centripetal condition with energy conservation between top and bottom to find critical launch speeds.
🔬 VIRTUAL LAB Energy Conservation Playground
Full Stage ↗
? Quick Concept Check

For a body completing a vertical circle of radius R on a string, the tension at the lowest point minus the tension at the highest point is:

Answer: 6 mg

09

The Potential Energy Of A Spring

2 concepts · Foundational
2 nodes
01

The Potential Energy Of A Spring

Elastic potential energy is U = ½ k x² = ½ × 200 × (0.1)² = ½ × 200 × 0.01 = 1 J.

Key Idea
The elastic potential energy of a spring is U = ½ k x², always positive for both extension and compression.
Boundary Trap
Forgetting the factor ½ (giving 2 J) is the classic trap. The energy stored is ½ k x², not k x².
Application Note
Use U = ½ k x² to find stored energy from the spring constant and displacement from equilibrium.
🔬 VIRTUAL LAB Energy Conservation Playground
Full Stage ↗
? Quick Concept Check

A spring of spring constant 100 N/m is stretched from 0.1 m to 0.3 m. The work done by the spring during this stretching is:

Answer: -4 J

02

The Potential Energy Of A Spring — Numerical & Application

The spring constant is inversely proportional to natural length (k ∝ 1/L). Halving the length doubles the stiffness, so each half has spring constant 2k.

Key Idea
For a spring, k × L = constant; cutting it into n equal pieces makes each piece have constant n k.
Boundary Trap
A trap is thinking a shorter spring is softer and answering k/2. In reality, shorter springs are stiffer: cutting a spring in half doubles its spring constant.
Application Note
Use k ∝ 1/L to find the new spring constant after cutting, and k_eq = k₁ + k₂ for parallel / 1/k_eq = 1/k₁ + 1/k₂ for series combinations.
🔬 VIRTUAL LAB Energy Conservation Playground
Full Stage ↗
? Quick Concept Check

Two springs of spring constant k each are connected in series. The equivalent spring constant is:

Answer: k/2

10

Collisions

2 concepts · Foundational
2 nodes
01

Collisions

Momentum is conserved: m v = (m + 2m) v_c, so v_c = v/3.

Key Idea
In a perfectly inelastic collision the bodies stick together and move with a common velocity v_c = Σ m_i u_i / Σ m_i, conserving momentum only.
Boundary Trap
A trap is dividing by the wrong total mass or conserving kinetic energy. In a perfectly inelastic collision kinetic energy is NOT conserved; only momentum is, so use m v = (m + 2m) v_c.
Application Note
Use conservation of momentum (not energy) to find the common velocity when bodies stick together.
🔬 VIRTUAL LAB Collisions
Full Stage ↗
? Quick Concept Check

Two identical billiard balls collide elastically, one initially at rest and the other moving at speed v. After the collision:

Answer: The moving ball stops and the stationary ball moves with speed v

02

Collisions — Numerical & Application

The common velocity after the collision is v/2 (momentum conservation). Final KE = ½ (2m)(v/2)² = ¼ m v², while initial KE = ½ m v². Hence half the kinetic energy (50%) is lost.

Key Idea
In a perfectly inelastic collision, momentum is conserved but kinetic energy is maximally lost; compute the loss as ΔK = K_initial − K_final.
Boundary Trap
A trap is assuming energy is conserved (0% lost) even though the collision is perfectly inelastic. Kinetic energy is lost as heat and deformation; only momentum is conserved.
Application Note
Find the common velocity first, then compute the initial and final kinetic energies to get the fractional energy loss.
🔬 VIRTUAL LAB Collisions
Full Stage ↗
? Quick Concept Check

The coefficient of restitution e is defined as the ratio of:

Answer: Separation velocity to approach velocity

11

Power

2 concepts · Foundational
2 nodes
01

Power

Power is P = F v = 100 × 2 = 200 W when the force and velocity are parallel.

Key Idea
Power is the rate of doing work: P = W/t on average, and P = F · v = F v cos θ instantaneously.
Boundary Trap
A trap is dividing or squaring the force and velocity. Power is the product F v, not F/v (50 W) or F² v (20000 W).
Application Note
Multiply the force by the velocity component parallel to it to obtain the power delivered.
🔬 VIRTUAL LAB Power Delivery
Full Stage ↗
? Quick Concept Check

An engine does 3000 J of work in 5 s. The average power delivered by the engine is:

Answer: 600 W

02

Power — Numerical & Application

The work done is m g h = 100 × 10 × 20 = 20000 J. Power = W / t = 20000 / 10 = 2000 W.

Key Idea
Power required to lift a mass m through height h in time t is P = m g h / t.
Boundary Trap
A trap is forgetting the time (answering 20000 W as work) or forgetting g. Power must divide the total work by the time taken.
Application Note
Compute the gravitational work and divide by the time to obtain the average lifting power.
🔬 VIRTUAL LAB Power Delivery
Full Stage ↗
? Quick Concept Check

A force of 60 N acts on a body moving at 5 m/s, the force making 60° with the velocity. The power delivered is:

Answer: 150 W