EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

⚡ INTEGRATED VIRTUAL LABORATORIES (2)
Open Subject Labs Catalog ↗
Heat Engine Carnot
Stage ↗
Isothermal Adiabatic Pv
Stage ↗
01

Thermodynamic Systems & Variables

2 concepts · Foundational
2 nodes
01

Thermodynamic Systems & Variables

Intensive variables (temperature, pressure, density) do not depend on the size of the system and stay fixed when the system is divided. Extensive variables (internal energy U, volume V, mass, heat capacity) are additive and scale with the amount of substance.

Key Idea
Intensive variables are size-independent (T, P, density); extensive variables are additive and scale with system size (U, V, mass, heat capacity).
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
Density = mass/volume is intensive even though mass and volume are each extensive, because their ratio is independent of system size.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

A system that can exchange energy but not matter with its surroundings is best described as:

Answer: Closed

02

Thermodynamic Systems & Variables — Numerical & Application

Molar volume = V/n is the ratio of two extensive quantities, so it is intensive. Volume, number of moles, and internal energy are all extensive and scale with system size.

Key Idea
Dividing one extensive variable by another (e.g. V/n, m/V) yields an intensive variable.
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
Molar volume V/n and density m/V are intensive because they are ratios of extensive quantities.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

A macroscopic state of a system is described by an equation of state. What form does it take?

Answer: f(P, V, T) = 0 relating the macroscopic state variables

02

Thermal Equilibrium

2 concepts · Foundational
2 nodes
01

Thermal Equilibrium

Thermal equilibrium is the state in which two bodies in thermal contact have no net heat flow between them, i.e., they share a common temperature.

Key Idea
Thermal equilibrium exists when two bodies in thermal contact reach a common temperature and net heat transfer becomes zero.
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
Heat flows only while a temperature gradient exists; once temperatures equalise, heat transfer stops.
🔬 VIRTUAL LAB Isothermal Adiabatic Pv
Full Stage ↗
? Quick Concept Check

A wall that permits heat flow but prevents any movement of matter is called:

Answer: A diathermic wall

02

Thermal Equilibrium — Numerical & Application

Because a quasi-static process passes through well-defined equilibrium states at every instant, its trajectory can be drawn as a continuous curve on the P-V diagram.

Key Idea
Only quasi-static processes can be represented as continuous curves on a P-V diagram.
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
Rapid (non-quasi-static) processes such as sudden free expansion cannot be traced as a continuous line.
🔬 VIRTUAL LAB Isothermal Adiabatic Pv
Full Stage ↗
? Quick Concept Check

Complete thermodynamic equilibrium requires which combination of conditions?

Answer: Uniform temperature, balanced forces (uniform pressure), and no net species transfer

03

Zeroth Law Of Thermodynamics

2 concepts · Foundational
2 nodes
01

Zeroth Law Of Thermodynamics

The Zeroth Law is a transitivity statement: if A is in thermal equilibrium with C and B is in thermal equilibrium with C, then A and B are mutually in thermal equilibrium, which underpins the concept of temperature.

Key Idea
Thermal equilibrium is transitive, which makes temperature a well-defined physical quantity.
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
A thermometer (C) in equilibrium with body A and separately with body B lets us conclude A and B are at the same temperature.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

Temperature is best defined as the physical quantity that determines:

Answer: Whether two systems in thermal contact will exchange heat

02

Zeroth Law Of Thermodynamics — Numerical & Application

T = 273.16 x (X / X_tr) = 273.16 x (3.0 x 10⁴ / 2.0 x 10⁴) = 273.16 x 1.5 = 409.7 K.

Key Idea
For a gas thermometer, absolute temperature scales linearly with the thermometric property X: T = 273.16 x (X / X_tr) K.
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
Substituting the given pressures directly gives the absolute temperature in kelvins.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

The fixed reference temperature assigned to the triple point of water is:

Answer: 273.16 K

04

Heat, Internal Energy And Work

2 concepts · Foundational
2 nodes
01

Heat, Internal Energy And Work

Internal energy U is a state function determined solely by the thermodynamic state. Heat Q and work W are path functions whose values depend on the process connecting two states.

Key Idea
U is a state function; Q and W are path functions.
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
Between the same two states, different paths give different Q and W, but the same change in U.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

For an ideal gas, the internal energy depends only on:

Answer: Absolute temperature

02

Heat, Internal Energy And Work — Numerical & Application

W = P x (change in V) = 2.0 x 10⁵ Pa x (0.03 - 0.01) m³ = 2.0 x 10⁵ x 0.02 = 4.0 x 10³ J.

Key Idea
Work done by a gas at constant pressure is W = P x (change in V).
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
Multiplying the constant pressure by the volume change gives the work directly.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

A gas is heated at constant volume (isochoric process). The work done by the gas is:

Answer: Zero

05

First Law Of Thermodynamics

2 concepts · Foundational
2 nodes
01

First Law Of Thermodynamics

In the physics convention, the heat supplied (change in Q) equals the increase in internal energy (change in U) plus the work done by the system W: change in Q = change in U + W.

Key Idea
Change in Q = Change in U + W, where W is the work done by the system on its surroundings.
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
Energy conservation in thermal form: supplied heat is partitioned between internal energy increase and boundary work.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

If a gas absorbs heat and simultaneously does positive work on its surroundings, the internal energy:

Answer: Increases only if the heat absorbed exceeds the work done

02

First Law Of Thermodynamics — Numerical & Application

Change in U = Q - W = 300 J - 100 J = 200 J.

Key Idea
Change in U = Q - W, where W is work done by the system.
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
Substituting Q = 300 J and W = 100 J gives change in U = 200 J.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

On a P-V diagram, a clockwise cyclic process represents:

Answer: A heat engine producing net positive work

06

Specific Heat Capacity

2 concepts · Foundational
2 nodes
01

Specific Heat Capacity

Mayer's relation gives C_p - C_v = R for an ideal gas, since heating at constant pressure must additionally do expansion work.

Key Idea
For an ideal gas, C_p - C_v = R, and γ = C_p / C_v.
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
Knowing C_v and R, one can immediately find C_p.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

The adiabatic index (ratio of specific heats) is defined as:

Answer: γ = C_p / C_v

02

Specific Heat Capacity — Numerical & Application

Using Mayer's relation, C_p = C_v + R = 12.5 + 8.3 = 20.8 J mol⁻¹ K⁻¹.

Key Idea
C_p = C_v + R for an ideal gas.
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
Substituting C_v = 12.5 and R = 8.3 yields C_p = 20.8 J mol⁻¹ K⁻¹.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

For an adiabatic process (x = γ) on an ideal gas, the molar heat capacity C = C_v + R/(1 - x) evaluates to:

Answer: Zero

07

Thermodynamic Processes

2 concepts · Foundational
2 nodes
01

Thermodynamic Processes

The slope of the adiabatic curve is γ times the slope of the isothermal curve at the same point: (dP/dV)_adiabatic = γ x (dP/dV)_isothermal, so the adiabatic is steeper.

Key Idea
On a P-V diagram the adiabatic curve is steeper than the isothermal through the same point by the factor γ.
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
Adiabatic expansion cools faster, so pressure drops more steeply than in isothermal expansion.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

Ranking the work done by an ideal gas expanding from the same initial state to the same final volume, the order is:

Answer: W_isobaric > W_isothermal > W_adiabatic > W_isochoric

02

Thermodynamic Processes — Numerical & Application

T V^(γ - 1) = constant, so T2 = T1 (V1/V2)^(γ - 1) = 300 x 8^(2/3) = 300 x 4 = 1200 K.

Key Idea
For adiabatic processes, T V^(γ - 1) = constant.
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
Substituting V1/V2 = 8 and γ - 1 = 2/3 gives T2 = 300 x 4 = 1200 K.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

Ranking the work required to compress an ideal gas from the same initial state to the same final volume, the order is:

Answer: W_adiabatic > W_isothermal > W_isobaric

08

Second Law Of Thermodynamics

2 concepts · Foundational
2 nodes
01

Second Law Of Thermodynamics

Kelvin-Planck: no heat engine operating in a cycle can absorb heat from a single reservoir and convert it entirely into work; some heat must be rejected to a colder sink (efficiency cannot equal 1).

Key Idea
No cyclic heat engine can convert 100% of absorbed heat into work (Kelvin-Planck).
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
Every real engine rejects some heat Q_C to a low-temperature reservoir.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

The Clausius statement of the Second Law states that:

Answer: Heat cannot spontaneously flow from a colder body to a hotter body without net external work

02

Second Law Of Thermodynamics — Numerical & Application

efficiency = 1 - Q_C/Q_H = 1 - 600/1000 = 0.4 = 40%.

Key Idea
efficiency = W/Q_H = 1 - Q_C/Q_H.
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
Substituting Q_H = 1000 J and Q_C = 600 J gives efficiency = 40%.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

A refrigerator extracts heat Q_C from a cold reservoir using work input W. Its coefficient of performance is:

Answer: β = Q_C / W

09

Reversible And Irreversible Processes

2 concepts · Foundational
2 nodes
01

Reversible And Irreversible Processes

Entropy change for a reversible transition is dS = dQ_rev / T, where dQ_rev is the heat exchanged reversibly at absolute temperature T.

Key Idea
dS = dQ_rev / T for a reversible process.
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
Entropy is a state function; its change depends only on initial and final states.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

Which of the following is a primary cause of irreversibility in real processes?

Answer: Dissipative friction and viscosity

02

Reversible And Irreversible Processes — Numerical & Application

The Clausius inequality states the integral of dQ/T is less than or equal to 0, holding as an exact equality only for reversible cycles and as a strict inequality for irreversible cycles.

Key Idea
The integral of dQ/T is less than or equal to 0, with equality only for reversible cycles.
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
The inequality is the mathematical basis for defining entropy as a state function.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

Entropy is a state function. This means the entropy change between two states depends on:

Answer: Only the initial and final states, not the path

10

Carnot Engine

2 concepts · Foundational
2 nodes
01

Carnot Engine

Carnot efficiency is 1 - T_C/T_H, where both temperatures MUST be in absolute kelvins.

Key Idea
Carnot efficiency = 1 - T_C/T_H (temperatures in kelvin).
Boundary Trap
Confusing internal vs external forces or sign of work done in thermodynamics (W = PΔ V vs -PΔ V).
Application Note
This is the maximum efficiency any engine can achieve between two given reservoirs.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

Carnot's first theorem states that:

Answer: No engine operating between two given temperatures can be more efficient than a reversible Carnot engine

02

Carnot Engine — Numerical & Application

efficiency = 1 - T_C/T_H = 1 - 300/500 = 1 - 0.6 = 0.4 = 40%.

Key Idea
Carnot efficiency = 1 - T_C/T_H.
Boundary Trap
Applying kinematic formulas v = u + at when acceleration is non-constant.
Application Note
Substituting T_H = 500 K and T_C = 300 K gives efficiency = 40%.
🔬 VIRTUAL LAB Heat Engine Carnot
Full Stage ↗
? Quick Concept Check

The four sequential stages of a Carnot cycle, in order, are:

Answer: Isothermal expansion, adiabatic expansion, isothermal compression, adiabatic compression