EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

⚡ INTEGRATED VIRTUAL LABORATORIES (1)
Open Subject Labs Catalog ↗
Molecular Speed Distribution
Stage ↗
01

Molecular Nature of Matter

2 concepts · Foundational
2 nodes
01

Molecular Nature of Matter

Dalton's law states that each gas exerts the pressure it would exert if it alone occupied the whole volume, and its partial pressure is proportional to its mole fraction: P_A = x_A · P_total = 0.25 × 4.0 atm = 1.0 atm.

Key Idea
P_i = x_i · P_total, where x_i = n_i / n_total is the mole fraction.
Boundary Trap
NEET trap: assuming each gas contributes an equal share of the total pressure (P_total divided by the number of gases) regardless of the mole amounts. Partial pressure scales with mole fraction, not with a simple head count of the gases.
Application Note
Here x_A = 0.25 and P_total = 4.0 atm, so P_A = 0.25 × 4.0 atm = 1.0 atm.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

A vessel contains 2 mol of He and 3 mol of Ne at a total pressure of 500 kPa. What is the partial pressure of Ne?

Answer: 300 kPa

02

Molecular Nature of Matter — Numerical & Application

First find the total pressure P_total = n_total·R·T/V = 1.0 × 0.0821 × 300 / 10 = 2.463 atm. The mole fraction of O₂ is 0.5, so P_O₂ = 0.5 × 2.463 atm = 1.23 atm.

Key Idea
P_total = n_total·R·T/V, and P_i = x_i · P_total with x_i = n_i / n_total.
Boundary Trap
NEET trap: computing only the total pressure and forgetting to multiply by the mole fraction to isolate the partial pressure of the requested gas.
Application Note
P_total = 1.0 × 0.0821 × 300 / 10 = 2.463 atm; P_O₂ = (0.5/1.0) × 2.463 = 1.23 atm.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

A gas mixture has a total pressure of 3.0 atm and the mole fraction of O₂ in it is 2/3. What is the partial pressure of O₂?

Answer: 2.0 atm

02

Molecular Nature Of Matter

2 concepts · Foundational
2 nodes
01

Molecular Nature Of Matter

The intermolecular force is the negative gradient of the potential, F = −dU/dr. At the bottom of the potential well the slope dU/dr = 0, so the force vanishes; this is the equilibrium separation r₀.

Key Idea
F = −dU/dr; equilibrium (F = 0) occurs at a stationary point of U(r), specifically the minimum r₀.
Boundary Trap
NEET trap: confusing the force F = −dU/dr with the potential U itself. At the minimum of U the force is zero, not a maximum — students often place maximum force at the potential minimum.
Application Note
At r₀ the slope of U(r) is zero, so F = 0 and the two molecules sit in equilibrium.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

At a separation slightly greater than the equilibrium separation r₀, the intermolecular force between two molecules is:

Answer: attractive (pulling the molecules back together)

02

Molecular Nature Of Matter — Numerical & Application

Y = k / r₀ = (20 N/m) / (2.0 × 10⁻¹⁰ m) = 1.0 × 10¹¹ N/m², a typical order of magnitude for a solid's Young's modulus.

Key Idea
Y = k / r₀, where k = (d²U/dr²) at the equilibrium separation.
Boundary Trap
NEET trap: writing Y = k · r₀ (multiplying instead of dividing) flips the exponent and gives an absurd 4 × 10⁻⁹; the relation is Y = k / r₀.
Application Note
Y = 20 N/m ÷ 2.0 × 10⁻¹⁰ m = 1.0 × 10¹¹ N/m².
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

Near equilibrium, the intermolecular potential changes by ΔU = −2.0 × 10⁻²¹ J over a displacement Δr = 1.0 × 10⁻¹⁰ m. What is the magnitude of the intermolecular force?

Answer: 2.0 × 10⁻¹¹ N

03

Behaviour Of Gases

2 concepts · Foundational
2 nodes
01

Behaviour Of Gases

An ideal gas obeys PV = nRT exactly. Substituting this into the definition gives Z = PV/(nRT) = 1 at every pressure and temperature.

Key Idea
Z = PV/(nRT); Z = 1 identically for an ideal gas.
Boundary Trap
NEET trap: real gases approach Z = 1 only at low pressure and high temperature; students often state this in reverse. Z = 1 identically holds only for the ideal gas.
Application Note
Substituting the ideal-gas law PV = nRT into the definition yields Z = 1 for any state.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

At ordinary temperatures, which gas exhibits Z > 1 even at moderate pressures because its intermolecular attraction is negligible?

Answer: H₂ (and He)

02

Behaviour Of Gases — Numerical & Application

Rewrite PV = nRT with n = m/M to get ρ = m/V = PM/(RT). Substituting: ρ = (1.00 atm × 32 g/mol) / (0.0821 L·atm·mol⁻¹·K⁻¹ × 300 K) = 32 / 24.63 = 1.30 g/L.

Key Idea
ρ = PM/(RT).
Boundary Trap
NEET trap: using the atomic mass of oxygen (16 g/mol) instead of the diatomic molar mass (32 g/mol) halves the density. Always use the molar mass of the actual molecule.
Application Note
ρ = (1.00 × 32) / (0.0821 × 300) = 32 / 24.63 = 1.30 g/L.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

How many moles of an ideal gas occupy 24.63 L at 1.0 atm and 300 K? (R = 0.0821 L·atm·mol⁻¹·K⁻¹)

Answer: 1.0 mol

04

Kinetic Theory Of An Ideal Gas

2 concepts · Foundational
2 nodes
01

Kinetic Theory Of An Ideal Gas

A molecule has three independent translational directions (x, y, z), each contributing (1/2)k_B T of average energy by equipartition. Thus ⟨E_trans⟩ = 3 × (1/2)k_B T = (3/2)k_B T.

Key Idea
⟨E_trans⟩ = (3/2) k_B T for a monoatomic gas (three translational degrees of freedom).
Boundary Trap
NEET trap: using (1/2)k_B T per molecule (the value for a single degree of freedom) instead of (3/2)k_B T for the three translational degrees of freedom.
Application Note
3 degrees of freedom × (1/2)k_B T = (3/2)k_B T.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

The pressure of an ideal gas is P = (1/3) n m v_rms², where n is the molecular number density. If v_rms is doubled while n is unchanged, the pressure becomes:

Answer: 4 times its original value

02

Kinetic Theory Of An Ideal Gas — Numerical & Application

v_rms = √(3RT/M) = √(3 × 8.31 × 300 / 0.032) = √(233719) ≈ 483 m/s.

Key Idea
v_rms = √(3RT/M).
Boundary Trap
NEET trap: using the molar mass in grams (32) instead of kilograms (0.032) inflates v_rms by a factor of √1000 ≈ 31.6. Always convert M to kg/mol for SI.
Application Note
v_rms = √(3 × 8.31 × 300 / 0.032) = √(233719) ≈ 483 m/s.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

The most probable speed of the same O₂ molecules at 300 K, v_mp = √(2RT/M), is closest to:

Answer: 395 m/s

05

Law Of Equipartition Of Energy

2 concepts · Foundational
2 nodes
01

Law Of Equipartition Of Energy

A rigid diatomic molecule has 3 translational degrees of freedom plus 2 rotational degrees of freedom (rotation about the internuclear axis has negligible moment of inertia and stores no energy), giving f = 5.

Key Idea
Rigid diatomic: f = 3 translational + 2 rotational = 5.
Boundary Trap
NEET trap: a diatomic molecule has only 2 rotational degrees of freedom (rotation about the molecular axis is negligible), giving f = 5 — not 6 or 3.
Application Note
O₂ has 3 translation + 2 rotation = 5 degrees of freedom.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

How many degrees of freedom does a monoatomic gas molecule have?

Answer: 3 (translational only)

02

Law Of Equipartition Of Energy — Numerical & Application

U = (f/2) n R T = (5/2) × 2 × 8.31 × 300 = 5 × 8.31 × 300 = 12465 J ≈ 1.25 × 10⁴ J.

Key Idea
U = (f/2) n R T.
Boundary Trap
NEET trap: forgetting the factor of n (number of moles) in U = (f/2) n R T, or mixing the per-molecule formula (f/2)k_B T with the molar gas constant R.
Application Note
U = (5/2) × 2 × 8.31 × 300 = 12465 J ≈ 1.25 × 10⁴ J.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

The average energy of a single diatomic molecule (f = 5) at 300 K is: (k_B = 1.38 × 10⁻²³ J/K)

Answer: 1.04 × 10⁻²⁰ J

06

Specific Heat Capacity

2 concepts · Foundational
2 nodes
01

Specific Heat Capacity

For a monoatomic gas f = 3, so γ = 1 + 2/f = 1 + 2/3 = 5/3.

Key Idea
γ = C_p/C_v = 1 + 2/f.
Boundary Trap
NEET trap: monoatomic gas has γ = 5/3 (f = 3) while diatomic has γ = 7/5 (f = 5). Swapping these two values is a common negative-marking error.
Application Note
f = 3 → γ = 1 + 2/3 = 5/3.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

For a rigid diatomic ideal gas (f = 5), the ratio of specific heats γ is:

Answer: 7/5

02

Specific Heat Capacity — Numerical & Application

C_v = (f/2)R = (5/2) × 8.31 = 20.775 ≈ 20.8 J·mol⁻¹·K⁻¹.

Key Idea
C_v = (f/2) R.
Boundary Trap
NEET trap: C_v = (f/2)R = (5/2)R for a diatomic gas; confusing it with C_p = (7/2)R = 29.1 J·mol⁻¹·K⁻¹ is a standard slip.
Application Note
C_v = (5/2) × 8.31 = 20.8 J·mol⁻¹·K⁻¹.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

The molar heat capacity at constant pressure C_p of the same diatomic gas (f = 5) is:

Answer: 29.1 J·mol⁻¹·K⁻¹

07

Mean Free Path

2 concepts · Foundational
2 nodes
01

Mean Free Path

The mean free path is a length — the average distance a molecule travels between two consecutive collisions with other molecules.

Key Idea
λ = average distance between successive collisions.
Boundary Trap
NEET trap: mean free path is a distance (λ), not a rate. Students confuse it with the collision frequency ν = ⟨v⟩/λ or the relaxation time τ = λ/⟨v⟩.
Application Note
λ is measured in metres, distinguishing it from a frequency (s⁻¹).
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

Which expression gives the mean free path of a gas molecule (n = molecular number density, d = molecular diameter)?

Answer: λ = 1/(√2 n π d²)

02

Mean Free Path — Numerical & Application

λ = 1/(√2 n π d²) = 1/(1.41 × 3.14 × (2.0 × 10⁻¹⁰)² × 2.0 × 10²⁵) = 1/(1.41 × 3.14 × 4.0 × 10⁻²⁰ × 2.0 × 10²⁵) = 1/(3.54 × 10⁶) ≈ 2.8 × 10⁻⁷ m.

Key Idea
λ = 1/(√2 n π d²).
Boundary Trap
NEET trap: omitting the √2 factor (using λ = 1/(nπd²)) overestimates λ by a factor of √2. The relative-velocity correction ⟨v_rel⟩ = √2⟨v⟩ is easy to forget.
Application Note
λ = 1/(1.41 × 3.14 × 4.0 × 10⁻²⁰ × 2.0 × 10²⁵) ≈ 2.8 × 10⁻⁷ m.
🔬 VIRTUAL LAB Molecular Speed Distribution
Full Stage ↗
? Quick Concept Check

At constant temperature, if the pressure of a gas is doubled, its mean free path becomes:

Answer: half its original value