EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

⚡ INTEGRATED VIRTUAL LABORATORIES (4)
Open Subject Labs Catalog ↗
Force Between Two Parallel Currents The Ampere
Stage ↗
Magnetic Field Due To A Current Element Biot Savart Law
Stage ↗
Magnetic Field On The Axis Of A Circular Current Loop
Stage ↗
Wheatstone Bridge
Stage ↗
01

Electric Current & Drift Velocity

2 concepts · Foundational
2 nodes
01

Electric Current & Drift Velocity

Conventional current is defined as the flow of positive charge, which moves from higher to lower potential. Electrons are negatively charged, so they drift against the electric field, from lower to higher potential.

Key Idea
Conventional current points from higher to lower potential; negative electrons drift from lower to higher potential.
Boundary Trap
Forgetting the sign of the charge carrier; electrons drift opposite to conventional current, so watch the signs in potential differences and current loops.
Application Note
In a copper wire connected to a battery, free electrons drift against the electric field while conventional current points along the field.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

In an electrolyte such as copper sulphate solution, which charge carriers are responsible for the current?

Answer: Both positive ions (cations) and negative ions (anions), moving in opposite directions

02

Electric Current & Drift Velocity — Numerical & Application

Charge Q = I × t. Converting 1 minute to 60 s gives Q = 2 A × 60 s = 120 C.

Key Idea
Q = I × t with time in seconds (SI units).
Boundary Trap
Plugging time in minutes directly into Q = It; always convert time to seconds (and verify units) before multiplying.
Application Note
For a 2 A current over 60 s, Q = 2 × 60 = 120 coulombs.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

A current of 3.2 A flows for 1 second. Given electron charge e = 1.6 × 10⁻¹⁹ C, approximately how many electrons pass a cross-section per second?

Answer: 2 × 10¹⁹

02

Electric Current

2 concepts · Foundational
2 nodes
01

Electric Current

Current obeys algebraic addition (ΣI = 0 at a junction) regardless of the orientation of the wires, so it does not follow vector addition and is a scalar.

Key Idea
Electric current adds algebraically at junctions (ΣI = 0), so it is a scalar; current density J is the vector.
Boundary Trap
Treating current as a vector because it has a direction arrow; watch the difference between the scalar current I and the vector current density J.
Application Note
Two wires carrying 3 A and 4 A meet; the total is 7 A regardless of their relative angle.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

The current density vector J at a point in a conductor points:

Answer: Along the direction of motion of the local positive charge carriers

02

Electric Current — Numerical & Application

At constant volume, doubling the length halves the area. Since R = ρL/A, the new resistance is ρ(2L)/(A/2) = 4R = n²R with n = 2.

Key Idea
When a wire is stretched n times at constant volume, R' = n²R.
Boundary Trap
Assuming resistance changes linearly with length; for a stretched wire at constant volume it scales as n² (and verify the length/area assumption).
Application Note
n = 2 gives R' = 2²R = 4R.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

When a wire narrows to half its cross-sectional area while carrying a steady current, the current density J in the narrow section:

Answer: doubles

03

Electric Currents In Conductors

2 concepts · Foundational
2 nodes
01

Electric Currents In Conductors

The microscopic form of Ohm's law is J = σE, with conductivity σ = 1/ρ. The other options misstate the relation between σ and ρ.

Key Idea
J = σE with σ = 1/ρ (microscopic Ohm's law).
Boundary Trap
Confusing conductivity σ with resistivity ρ; remember σ = 1/ρ and J = σE = E/ρ.
Application Note
A field E in a medium of conductivity σ produces a current density J = σE = E/ρ.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

A semiconductor diode's current-voltage (I-V) curve is characterised by:

Answer: Asymmetric non-linear conduction with exponential forward current and a reverse breakdown region

02

Electric Currents In Conductors — Numerical & Application

At constant volume, stretching to 3 times the length reduces the area to A/3. R' = ρ(3L)/(A/3) = 9R = 9 × 10 Ω = 90 Ω.

Key Idea
R' = n²R when a wire is stretched n times at constant volume.
Boundary Trap
Multiplying the resistance by the stretch factor n instead of n² (area also changes when volume is constant).
Application Note
n = 3, R = 10 Ω → R' = 9 × 10 = 90 Ω.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

A wire of length 2 m and cross-sectional area 1.0 × 10⁻⁶ m² has resistance 3.0 × 10⁻² Ω. Its resistivity is:

Answer: 1.5 × 10⁻⁸ Ω·m

04

Drift Of Electrons And The Origin Of Resistivity

2 concepts · Foundational
2 nodes
01

Drift Of Electrons And The Origin Of Resistivity

Electrons move chaotically at thermal speeds near 10⁵ m/s with zero average, while the applied field superimposes a tiny net drift velocity of order 10⁻⁴ m/s.

Key Idea
Drift velocity (~10⁻⁴ m/s) is far smaller than the random thermal speed (~10⁵ m/s).
Boundary Trap
Thinking electrons race along a wire at the speed of light; what travels fast is the field impulse, not the electrons.
Application Note
Conduction electrons crawl at millimetres per second while the electric field signal travels at near light speed.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

Electron mobility μ is defined as:

Answer: μ = v_d/E, with SI unit m²/(V·s)

02

Drift Of Electrons And The Origin Of Resistivity — Numerical & Application

Mobility μ = eτ/m = (1.6 × 10⁻¹⁹ × 2.5 × 10⁻¹⁴)/(9.1 × 10⁻³¹) = 4.4 × 10⁻³ m²/(V·s).

Key Idea
μ = eτ/m.
Boundary Trap
Inverting the mobility formula (μ = eτ/m, not m/(eτ)); also misplacing the power of ten.
Application Note
e = 1.6 × 10⁻¹⁹ C, τ = 2.5 × 10⁻¹⁴ s, m = 9.1 × 10⁻³¹ kg → μ = 4.4 × 10⁻³ m²/(V·s).
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

Using the same electron (μ = 4.4 × 10⁻³ m²/(V·s)), the drift velocity in an electric field of 100 V/m is:

Answer: 0.44 m/s

05

Resistivity Of Various Materials

2 concepts · Foundational
2 nodes
01

Resistivity Of Various Materials

Metals have the lowest resistivity (~10⁻⁸ Ω·m), semiconductors are intermediate (10⁻⁵ to 10² Ω·m), and insulators the highest (10¹⁰ to 10¹⁶ Ω·m).

Key Idea
Resistivity order: metals < semiconductors < insulators.
Boundary Trap
Reversing the semiconductor and insulator ranges; keep the three bands distinct.
Application Note
Copper (~10⁻⁸) < silicon (semiconductor) < glass (insulator).
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

In the standard resistor colour-code mnemonic 'BB ROY of Great Britain had a Very Good Wife', the digit represented by 'Black' is:

Answer: 0

02

Resistivity Of Various Materials — Numerical & Application

Yellow = 4, Violet = 7, Orange = multiplier 10³, Silver = ±10%. Value = 47 × 10³ = 47 kΩ ± 10%.

Key Idea
Two digit bands, then the multiplier 10ⁿ, then the tolerance band.
Boundary Trap
Confusing Silver (±10%) with Gold (±5%), or using Orange (10³) as a digit rather than the multiplier.
Application Note
47 × 10³ = 47 kΩ with Silver = ±10%.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

Which of the following materials has a temperature coefficient of resistance very close to zero, making it ideal for standard resistance coils?

Answer: Manganin

06

Temperature Dependence Of Resistivity

2 concepts · Foundational
2 nodes
01

Temperature Dependence Of Resistivity

In metals the carrier density n is fixed, so heating increases lattice vibrations, shortens τ, and raises resistivity (α > 0). Semiconductors instead gain carriers with temperature, giving α < 0.

Key Idea
Metals: α > 0 (τ drops). Semiconductors: α < 0 (n rises).
Boundary Trap
Assigning the wrong sign of α to metals vs semiconductors; remember metals' resistivity rises and semiconductors' falls with temperature.
Application Note
Copper's resistance rises with temperature (α positive), while a thermistor's resistance falls.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

Why does the resistivity of a semiconductor decrease with increasing temperature?

Answer: Carrier concentration n rises exponentially across the band gap, outweighing any scattering increase.

02

Temperature Dependence Of Resistivity — Numerical & Application

R = R₀[1 + α(T − T₀)] = 100[1 + (5 × 10⁻³)(100)] = 100 × 1.5 = 150 Ω.

Key Idea
R = R₀[1 + αΔT].
Boundary Trap
Forgetting to add the 1 in the factor (1 + αΔT), or using a temperature difference other than 100 °C.
Application Note
R = 100 × (1 + 0.005 × 100) = 150 Ω.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

A wire has resistance 20 Ω at 20 °C and 22 Ω at 120 °C. Its temperature coefficient α is:

Answer: 1 × 10⁻³ °C⁻¹

07

Electrical Energy, Power

2 concepts · Foundational
2 nodes
01

Electrical Energy, Power

Electrical power is P = VI; substituting V = IR gives P = I²R, and substituting I = V/R gives P = V²/R.

Key Idea
P = VI = I²R = V²/R.
Boundary Trap
Using the wrong equivalent form (e.g. P = V²/I or P = I²/V); all three valid forms are VI, I²R, and V²/R.
Application Note
A 100 W, 220 V bulb draws I = P/V = 100/220 A.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

A bulb is rated 100 W, 220 V. Its operating resistance is:

Answer: 484 Ω

02

Electrical Energy, Power — Numerical & Application

H = I²Rt = (2)² × 10 × 300 = 12000 J = 12 kJ.

Key Idea
H = I²Rt (Joule heating), with time in seconds.
Boundary Trap
Using minutes instead of seconds in H = I²Rt; convert 5 minutes to 300 s.
Application Note
H = 2² × 10 × 300 = 12000 J = 12 kJ.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

A 2 kW heater operates for 3 hours. The electrical energy consumed is:

Answer: 6 kWh

08

Cells, Emf, Internal Resistance

2 concepts · Foundational
2 nodes
01

Cells, Emf, Internal Resistance

During discharge the internal resistance drops some voltage, so the terminal voltage is less than the emf: V = ε − Ir.

Key Idea
Discharging: V = ε − Ir. Charging: V = ε + Ir.
Boundary Trap
Using V = ε + Ir for a discharging cell; the plus sign applies only while the cell is being charged.
Application Note
On open circuit (I = 0), V = ε.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

While a cell is being charged (current forced into its positive terminal), the terminal voltage is:

Answer: V = ε + Ir (greater than the emf)

02

Cells, Emf, Internal Resistance — Numerical & Application

Current I = ε/(R + r) = 1.5/3 = 0.5 A. Terminal voltage V = ε − Ir = 1.5 − 0.5 × 0.5 = 1.25 V.

Key Idea
Terminal voltage V = ε − Ir with I = ε/(R + r).
Boundary Trap
Reporting the emf as the terminal voltage; the internal-resistance drop Ir must be subtracted during discharge.
Application Note
I = 0.5 A, so V = 1.5 − 0.25 = 1.25 V.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

A cell has emf 2.0 V. When it delivers a current of 0.4 A, its terminal voltage is 1.6 V. Its internal resistance is:

Answer: 1.0 Ω

09

Cells In Series And In Parallel

2 concepts · Foundational
2 nodes
01

Cells In Series And In Parallel

Aiding series cells add their emfs: ε_eq = ε₁ + ε₂ = 1.5 + 1.5 = 3.0 V. Their internal resistances also add.

Key Idea
Aiding series: ε_eq = ε₁ + ε₂ and r_eq = r₁ + r₂.
Boundary Trap
Averaging the emfs of series cells; in series the emfs add (as do the internal resistances), they are not averaged.
Application Note
1.5 V + 1.5 V = 3.0 V.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

Two cells of emf 6 V and 2 V are connected in series with opposite polarity (opposing). The equivalent emf is:

Answer: 4 V

02

Cells In Series And In Parallel — Numerical & Application

For mixed grouping with m = 3 rows and n = 2 cells per row, I = mnε/(mR + nr) = (3 × 2 × 1.5)/(3 × 2 + 2 × 1) = 9/8 = 1.125 A.

Key Idea
Mixed grouping: I = mnε/(mR + nr).
Boundary Trap
Swapping m (rows) and n (cells in series per row) in the formula I = mnε/(mR + nr).
Application Note
I = (3 × 2 × 1.5)/(3 × 2 + 2 × 1) = 9/8 = 1.125 A.
🔬 VIRTUAL LAB Force Between Two Parallel Currents The Ampere
Full Stage ↗
? Quick Concept Check

Three identical cells of emf 2 V and internal resistance 0.5 Ω are connected in parallel. The equivalent emf and internal resistance are:

Answer: 2 V and 0.167 Ω

10

Wheatstone Bridge

2 concepts · Foundational
2 nodes
01

Wheatstone Bridge

The bridge is balanced (null galvanometer deflection) when the ratio of the two arms in one branch equals that in the other: P/Q = R/S.

Key Idea
Wheatstone balance condition: P/Q = R/S.
Boundary Trap
Inverting the balance ratio (P/Q = S/R) or using sums/products; the condition is the equality of ratios.
Application Note
At balance the galvanometer current I_G = 0.
🔬 VIRTUAL LAB Wheatstone Bridge
Full Stage ↗
? Quick Concept Check

When a Wheatstone bridge is balanced, the potentials at the two junction points across the galvanometer are:

Answer: equal

02

Wheatstone Bridge — Numerical & Application

S = R(100 − l₁)/l₁ = 20 × (100 − 80)/80 = 20 × 20/80 = 5 Ω.

Key Idea
Metre bridge: S = R(100 − l₁)/l₁.
Boundary Trap
Using the balance length 80 cm directly as the ratio instead of (100 − l₁)/l₁.
Application Note
S = 20 × 20/80 = 5 Ω.
🔬 VIRTUAL LAB Wheatstone Bridge
Full Stage ↗
? Quick Concept Check

The Wheatstone bridge is most sensitive when all four arm resistances are:

Answer: of nearly equal magnitude