EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

⚡ INTEGRATED VIRTUAL LABORATORIES (1)
Open Subject Labs Catalog ↗
Inductance
Stage ↗
01

Faraday's Law of Induction

2 concepts · Foundational
2 nodes
01

Faraday's Law of Induction

Induction depends on relative motion because that is what changes the magnetic flux linked with the coil. When magnet and coil move together at the same velocity, their separation — and hence the linked flux — stays constant, so the induced EMF is zero.

Key Idea
An induced EMF arises only when the magnetic flux linked with a coil changes with time. Identical (common) motion of the magnet and coil leaves their relative separation — and hence the flux — unchanged, so no EMF is induced.
Boundary Trap
Assuming any motion of the coil through space induces an EMF; induction requires a change in linked magnetic flux, which in turn requires relative motion between the coil and the magnet.
Application Note
Two observers moving together with the magnet-coil system would measure the same zero flux change, confirming that induction depends on relative velocity v_rel, not on absolute velocity.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

In which of the following cases is an EMF definitely NOT induced in a closed conducting loop?

Answer: The loop and a bar magnet are moved together with the same velocity, keeping their relative separation fixed.

02

Faraday's Law of Induction — Numerical & Application

By Lenz's law the ring opposes the increase in flux caused by the approaching magnet, so it induces a current whose face toward the magnet is a like (north) pole. The resulting upward repulsion reduces the net downward acceleration below g.

Key Idea
By Lenz's law the ring opposes the increase in flux caused by the approaching magnet, so it induces a current whose face toward the magnet is a like (north) pole. The upward repulsion reduces the net downward acceleration below g.
Boundary Trap
Ignoring Lenz's law and claiming the magnet falls with a = g; the induced current always opposes the flux change, braking the magnet (a < g).
Application Note
As the magnet approaches, flux increases and the induced field opposes (repels); once the magnet passes and flux decreases, the induced field reverses and pulls upward, braking the magnet on both approach and recession.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

A magnet is dropped through a coil and the peak galvanometer deflection is noted. The experiment is repeated with the magnet dropped from a greater height so it crosses the coil faster. How does the peak deflection compare (assuming it does not saturate)?

Answer: The peak deflection is larger, because a higher speed produces a higher rate of change of flux dΦ/dt.

02

The Experiments Of Faraday And Henry

2 concepts · Foundational
2 nodes
01

The Experiments Of Faraday And Henry

Faraday's three experiments — moving a magnet, moving a current-carrying primary coil, and switching a current on/off in a stationary primary — all produce a deflection only while the magnetic flux linked with the secondary changes; a steady flux gives zero deflection.

Key Idea
Faraday's three experiments — (1) moving a magnet, (2) moving a current-carrying primary coil, and (3) switching a current on/off in a stationary primary — all produce a deflection only while the magnetic flux linked with the secondary changes.
Boundary Trap
Believing a steady magnet or steady current inside a coil keeps the galvanometer deflected; deflection occurs only while the flux is changing.
Application Note
In experiment (3) the primary carries a steady current and is stationary, yet switching the current changes dI/dt, which changes the flux through the secondary and induces a transient deflection.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

In Faraday's third experiment, two coils are wound close together on the same core. A steady current is kept flowing in the primary (coil 1). Under which condition is an EMF induced in the secondary (coil 2)?

Answer: Only at the instants when the primary current is switched on or off, i.e. while it is changing.

02

The Experiments Of Faraday And Henry — Numerical & Application

Lenz's law is a statement of energy conservation: the mechanical work done against the induced magnetic force is converted 100% into electrical energy, which is then dissipated as Joule heat (I²R) in the circuit resistance.

Key Idea
Lenz's law is a statement of energy conservation: the mechanical work done against the induced magnetic force is converted 100% into electrical energy, which is dissipated as Joule heat (I²R) in the circuit resistance.
Boundary Trap
Thinking the induced current can aid the motion; Lenz's law converts external mechanical work fully into electrical energy (Joule heat), never amplifying the motion.
Application Note
If the induced current aided the motion instead of opposing it, the magnet would accelerate on its own, extracting energy from nowhere and violating conservation of energy — which is why Lenz's minus sign is mandatory.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

The magnetic flux linked with a coil is decreasing. How does the induced magnetic field of the coil behave?

Answer: It points in the same direction as the decreasing applied field, to oppose the decrease.

03

Magnetic Flux

2 concepts · Foundational
2 nodes
01

Magnetic Flux

Magnetic flux is Φ = B·A = B A cos θ, the product of the field strength and the effective perpendicular area. Its SI unit is the weber: 1 Wb = 1 T·m² = 1 V·s.

Key Idea
Magnetic flux is Φ = B·A = B A cos θ, the product of field strength and effective perpendicular area. Its SI unit is the weber: 1 Wb = 1 T·m² = 1 V·s.
Boundary Trap
Using B A sin θ instead of B A cos θ (flux is B times the perpendicular area), or misquoting the weber as a field unit.
Application Note
When θ = 0° the field is normal to the surface and flux is maximum (BA); when θ = 90° the field is parallel to the surface and flux is zero — the two end-points used in most flux problems.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

What are the dimensions of magnetic flux Φ?

Answer: [M L² T⁻² A⁻¹]

02

Magnetic Flux — Numerical & Application

The total charge flown is Δq = ∫ i dt = ∫ (ε/R) dt = (N/R)∫ (dΦ/dt) dt = N ΔΦ / R. The time interval cancels out, so the charge depends only on the total flux change, not on how fast it occurs.

Key Idea
The total charge flown is Δq = ∫ i dt = (N/R) ΔΦ. The time interval cancels, so the charge depends only on the total flux change and the resistance, not on how fast the flux varies.
Boundary Trap
Including Δt in the charge flown; the charge Δq = N ΔΦ / R is independent of the time taken for the flux change.
Application Note
This time-independence is why a ballistic galvanometer (which measures total charge) can determine flux changes regardless of the speed of the flux variation.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

A coil of N turns, each of area A and total resistance R, is flipped through 180° in a uniform magnetic field B (the field is perpendicular to the coil's plane both before and after). What is the total charge that flows through the coil?

Answer: Δq = 2 N B A / R

04

Motional Electromotive Force

2 concepts · Foundational
2 nodes
01

Motional Electromotive Force

In a rod moving perpendicular to B, each free charge feels F = q(v × B), driving electrons to one end. The resulting charge separation builds an electric field until qE = qvB, giving the motional EMF ε = E L = B v L.

Key Idea
In a rod moving perpendicular to B, each charge feels F = q(v × B), driving electrons to one end. Charge separation builds an electric field until qE = qvB, giving the motional EMF ε = E L = B v L.
Boundary Trap
Missing the physical origin (magnetic force q(v × B) on the carriers) or using ε = B v L² instead of B v L.
Application Note
This is the generator principle in reverse of a motor: motion plus magnetic field produces EMF, and connecting the rod into a circuit converts mechanical power into electrical power.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

A conducting rod of length L slides with velocity v on two frictionless rails in a perpendicular field B, completing a circuit of resistance R. What is the magnetic force on the rod while the induced current flows?

Answer: F = B² L² v / R, opposing the motion of the rod.

02

Motional Electromotive Force — Numerical & Application

For a rod rotating about one end, the linear velocity of an element at distance r is v = ω r, varying from 0 at the pivot to ω L at the tip. Integrating, ε = ∫₀^L B (ω r) dr = (1/2) B ω L².

Key Idea
For a rod rotating about one end, the linear velocity of an element at distance r is v = ω r, varying from 0 to ω L. Integrating gives ε = ∫₀^L B (ω r) dr = (1/2) B ω L².
Boundary Trap
Using ε = B ω L² and forgetting the factor 1/2, which arises because the rod's speed varies linearly from 0 to ω L.
Application Note
The same result follows from ε = B × (average velocity) × L = B × (ω L / 2) × L, i.e. half the value for a purely translating rod whose speed equals the tip speed.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

A rod of length L slides with constant velocity v on frictionless rails in a perpendicular field B, completing a circuit of resistance R. At what rate is mechanical power converted into electrical (Joule heating) power?

Answer: P = B² L² v² / R

05

Inductance

2 concepts · Foundational
2 nodes
01

Inductance

Self-inductance L is defined by ε = −L (dI/dt): a coil has L = 1 henry when a current changing at 1 A/s induces an EMF of 1 V. Hence 1 H = 1 V·s/A = 1 Wb/A.

Key Idea
Self-inductance L is defined by ε = −L (dI/dt): a coil has L = 1 henry when a current changing at 1 A/s induces an EMF of 1 V. Hence 1 H = 1 V·s/A = 1 Wb/A.
Boundary Trap
Mixing up the defining relation ε = −L dI/dt with ε = L d²I/dt², or misquoting the henry as a field (tesla) unit.
Application Note
L represents the electrical 'inertia' of a circuit — a large L resists changes in current, just as a large mass resists changes in velocity.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

A current I flows through an inductor of self-inductance L. How much magnetic energy is stored in the inductor?

Answer: U = (1/2) L I²

02

Inductance — Numerical & Application

The mutual inductance of coaxial solenoids is M = μ₀ n₁ n₂ π r₁² l, where the area is always that of the inner solenoid (radius r₁) because that is the region through which the flux of one links the other.

Key Idea
The mutual inductance of coaxial solenoids is M = μ₀ n₁ n₂ π r₁² l, where the area is always that of the inner solenoid (radius r₁), because that is the region through which the flux of one links the other.
Boundary Trap
Using the outer solenoid's area r₂ instead of the inner r₁ in M = μ₀ n₁ n₂ π r₁² l.
Application Note
A common trap is using the outer solenoid's area r₂; the flux produced by the outer solenoid that threads the inner one is limited to π r₁², so r₁ (not r₂) appears in M.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

Two coils have self-inductances L₁ and L₂ and a mutual inductance M. What is the correct expression for the coefficient of coupling k, and what does k = 0 signify?

Answer: k = M / √(L₁ L₂), and k = 0 means the two coils are placed perpendicular so no flux links them.

06

Ac Generator

2 concepts · Foundational
2 nodes
01

Ac Generator

Since ε = −dΦ/dt and Φ = N B A cos ωt, differentiating gives ε = N B A ω sin ωt = ε₀ sin ωt, with peak EMF ε₀ = N B A ω.

Key Idea
Since ε = −dΦ/dt and Φ = N B A cos ωt, differentiating gives ε = N B A ω sin ωt = ε₀ sin ωt, with peak EMF ε₀ = N B A ω.
Boundary Trap
Forgetting the minus sign/differentiation that turns cos ωt into sin ωt (EMF is 90° out of phase with flux), or dropping the factor ω.
Application Note
Because the derivative of cos is −sin, the EMF is a sine function 90° out of phase with the flux: EMF is zero when flux is maximum and maximum when flux is zero.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

In an AC generator, at the instant the plane of the coil is perpendicular to the magnetic field (flux is maximum), what is the induced EMF?

Answer: The EMF is zero, because the instantaneous rate of change of flux dΦ/dt is zero at this position.

02

Ac Generator — Numerical & Application

Slip rings maintain continuous electrical contact without reversing, so the output remains sinusoidal AC. A split-ring commutator reverses the connection to the external circuit every half rotation, making both half-cycles unidirectional to give pulsating DC.

Key Idea
Slip rings maintain continuous electrical contact without reversing, so the output remains sinusoidal AC. A split-ring commutator reverses the connection every half rotation, making both half-cycles unidirectional and giving pulsating DC.
Boundary Trap
Confusing slip rings (which give AC output) with a split-ring commutator (which rectifies to pulsating DC).
Application Note
The commutator 'flips' the negative half-cycle upward, which is why a DC generator's output is a rectified sine (pulsating DC), not a pure steady voltage.
🔬 VIRTUAL LAB Inductance
Full Stage ↗
? Quick Concept Check

In India, the standard domestic AC supply has an RMS voltage of 220 V and a frequency of 50 Hz. What is the time period of this supply?

Answer: 20 ms