EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

⚡ INTEGRATED VIRTUAL LABORATORIES (4)
Open Subject Labs Catalog ↗
Elastic Moduli Comparison
Stage ↗
Elastic Moduli
Stage ↗
Stress Strain Curve
Stage ↗
Stress Strain Curve
Stage ↗
01

Elasticity & Interatomic Forces

2 concepts · Foundational
2 nodes
01

Elasticity & Interatomic Forces

A perfectly elastic body fully recovers its original shape and size once the deforming force is removed. Putty and wax are plastic (they retain deformation); Hooke's law holds only in the elastic region; and elasticity originates from interatomic restoring forces.

Key Idea
A material is elastic if interatomic restoring forces return it to its original configuration once the deforming force is removed; a plastic body retains permanent deformation.
Boundary Trap
Mistaking a large extension for high elasticity; elasticity is measured by the restoring force (modulus), not by how far a body stretches.
Application Note
This distinction sets the elastic limit: load a material beyond it and it will no longer fully recover its shape.
🔬 VIRTUAL LAB Elastic Moduli Comparison
Full Stage ↗
? Quick Concept Check

Which of the following pairs is correctly classified?

Answer: Quartz fibre and phosphor bronze are highly elastic; putty and wax are plastic.

02

Elasticity & Interatomic Forces — Numerical & Application

The interatomic force constant is k = Y·r0 (with a constant of order unity). Dimensionally, Young's modulus (N/m²) multiplied by a length (m) gives N/m, the units of a spring constant.

Key Idea
k = Y·r0 connects the microscopic interatomic spring constant to the macroscopic Young's modulus and the equilibrium separation r0.
Boundary Trap
Dropping the factor r0 or inverting the relation when connecting the microscopic force constant to the macroscopic modulus.
Application Note
This is how elasticity is understood microscopically: atoms behave as balls joined by springs whose stiffness k is set by Y and the bond length r0.
🔬 VIRTUAL LAB Elastic Moduli Comparison
Full Stage ↗
? Quick Concept Check

What does the interatomic spring model of a solid imply about the origin of elasticity?

Answer: Elastic restoring forces arise from the interatomic potential energy curve U(r) near the equilibrium separation r0.

02

Stress And Strain

2 concepts · Foundational
2 nodes
01

Stress And Strain

A force applied parallel (tangential) to a surface produces shearing stress, which deforms the body into a parallelogram and produces shearing strain.

Key Idea
Stress is classified by the direction of the applied force relative to the surface: perpendicular (normal/longitudinal), parallel (shearing), or uniform from all sides (hydraulic).
Boundary Trap
Misclassifying a tangential force as a normal (longitudinal) stress; the type of stress depends on the direction of the force relative to the surface.
Application Note
Identify the force orientation first, then the corresponding strain type - this classification is the first step in every elasticity numerical.
🔬 VIRTUAL LAB Stress Strain Curve
Full Stage ↗
? Quick Concept Check

A solid sphere is immersed in a fluid and subjected to a uniform increase in pressure from all directions. The resulting stress is:

Answer: Hydraulic (volumetric) stress

02

Stress And Strain — Numerical & Application

Poisson's ratio is ν = -lateral strain / longitudinal strain = -(Δd/d)/(ΔL/L). The minus sign makes ν positive for ordinary materials, since a stretched wire gets longer (ΔL > 0) but thinner (Δd < 0).

Key Idea
ν = -lateral strain / longitudinal strain = -(Δd/d)/(ΔL/L); for most metals ν lies between 0.2 and 0.4.
Boundary Trap
Omitting the minus sign in Poisson's ratio, or mixing up which strain is in the numerator and denominator.
Application Note
ν is needed to compute the fractional change in volume when a body is stretched.
🔬 VIRTUAL LAB Stress Strain Curve
Full Stage ↗
? Quick Concept Check

For an incompressible material, the value of Poisson's ratio is:

Answer: 0.5

03

Stress-Strain Curve

2 concepts · Foundational
2 nodes
01

Stress-Strain Curve

The proportional limit is the stress up to which stress is proportional to strain, so Hooke's law holds in this linear region.

Key Idea
The proportional limit is the stress up to which stress is proportional to strain; the yield point marks the onset of noticeable plastic flow, and the ultimate tensile strength is the maximum stress on the curve.
Boundary Trap
Confusing the proportional limit with the yield point or the ultimate tensile strength.
Application Note
Identifying these milestones lets you read off whether a material will return to shape or fail under a given load.
🔬 VIRTUAL LAB Stress Strain Curve
Full Stage ↗
? Quick Concept Check

The maximum stress a material can withstand before it fractures, as read from the stress-strain curve, is called the:

Answer: Ultimate tensile strength

02

Stress-Strain Curve — Numerical & Application

Elastomers such as rubber can be stretched to several times their original length and still recover, and their stress-strain curve shows no sharp yield point.

Key Idea
Elastomers (rubber-like polymers) show very large, non-Hookean elastic strains with no well-defined yield point, unlike metals.
Boundary Trap
Assuming all materials show a sharp yield point; elastomers stretch enormously without one.
Application Note
This is why a rubber band stretches enormously yet returns - a distinctly different stress-strain curve from a metal wire.
🔬 VIRTUAL LAB Stress Strain Curve
Full Stage ↗
? Quick Concept Check

In a complete loading-unloading cycle on a stress-strain curve, the area enclosed by the hysteresis loop represents:

Answer: Mechanical energy dissipated as heat per cycle

04

Elastic Moduli

2 concepts · Foundational
2 nodes
01

Elastic Moduli

Young's modulus is the ratio of longitudinal stress to longitudinal strain: Y = (F/A)/(ΔL/L) = FL/(A·ΔL).

Key Idea
Young's modulus is the ratio of longitudinal stress to longitudinal strain: Y = (F/A)/(ΔL/L) = FL/(A·ΔL).
Boundary Trap
Reversing the numerator and denominator when writing Y = FL/(A·ΔL).
Application Note
Use this to predict the extension of a wire under load, or to back out the modulus from measured F, L, A and ΔL.
🔬 VIRTUAL LAB Elastic Moduli Comparison
Full Stage ↗
? Quick Concept Check

The extension of a wire under a given load depends inversely on its cross-sectional area. Which option best explains why?

Answer: A thicker wire has a larger area over which the force is distributed, reducing the stress and hence the strain.

02

Elastic Moduli — Numerical & Application

The energy density is the area under the linear stress-strain curve, i.e. a triangle of base ε and height σ: u = ½·σ·ε. Equivalently u = ½·Y·ε² = σ²/(2Y).

Key Idea
u = ½·stress·strain = ½·Y·ε² = σ²/(2Y).
Boundary Trap
Forgetting the factor 1/2 in the energy density (the area of the triangle under the linear stress-strain curve).
Application Note
This is the elastic energy you can store in (or release from) a deformed body - the basis of springs and elastic potential energy.
🔬 VIRTUAL LAB Elastic Moduli Comparison
Full Stage ↗
? Quick Concept Check

Which expression for the elastic energy density is equivalent to ½·stress·strain when the wire obeys Hooke's law (σ = Y·ε)?

Answer: σ² / (2Y)

05

Applications Of Elastic Behaviour Of Materials

2 concepts · Foundational
2 nodes
01

Applications Of Elastic Behaviour Of Materials

The sag is inversely proportional to d³ but only inversely proportional to b, so increasing the depth d is far more effective at reducing sag than increasing the breadth b.

Key Idea
δ = W·L³/(4·Y·b·d³): sag varies as 1/d³ but only as 1/b, so deepening a beam is far more effective than widening it.
Boundary Trap
Thinking breadth b and depth d matter equally, when sag varies as 1/d³ but only as 1/b.
Application Note
This is why I-section girders place most of their material in the flanges far from the neutral axis - maximising the effective depth (and second moment of area) for a given mass.
🔬 VIRTUAL LAB Elastic Moduli Comparison
Full Stage ↗
? Quick Concept Check

Why are steel girders used in construction shaped like an 'I' rather than a solid rectangle?

Answer: The I-section concentrates material in the flanges (top and bottom), greatly increasing stiffness against bending for the same mass.

02

Applications Of Elastic Behaviour Of Materials — Numerical & Application

The safe (or working) stress is obtained by dividing the yield (or breaking) stress by the factor of safety: σ_safe = σ_yield / n. With n > 1 the allowed stress is kept below the yield point.

Key Idea
σ_safe = σ_yield / (factor of safety); the factor of safety (n > 1) is a margin so the structure never reaches its yield point in service.
Boundary Trap
Multiplying by the factor of safety instead of dividing - the safe stress must be smaller than the yield stress.
Application Note
Crane cables, bridge members and machine parts are sized so the actual stress stays below σ_safe.
🔬 VIRTUAL LAB Elastic Moduli Comparison
Full Stage ↗
? Quick Concept Check

The maximum height to which a mountain (or a column of rock) can rise on Earth is limited by the condition that the stress at its base must not exceed the yield stress. This maximum height is:

Answer: h_max = σ_yield / (ρ × g)