EduProd
EduProd
JEE PCM PLATFORM
📊 Dashboard
LEARN MODULE · SCHEMATIC MODE

Trace it. Derive it. Know it.

Every cluster below maps one schematic path — from first principles to the final equation. Expand a node to follow the full derivation trace.

⚡ INTEGRATED VIRTUAL LABORATORIES (1)
Open Subject Labs Catalog ↗
Torque On Current Loop Magnetic Dipole
Stage ↗
01

The Earth's Magnetism

2 concepts · Foundational
2 nodes
01

The Earth's Magnetism

Resolve B_E into perpendicular components: the horizontal component is B_H = B_E cos δ and the vertical component is B_V = B_E sin δ. Dividing the two gives tan δ = B_V / B_H, the standard definition of the angle of dip.

Key Idea
For Earth's field resolved in the magnetic meridian: B_H = B_E cos δ, B_V = B_E sin δ, tan δ = B_V / B_H, and B_E = √(B_H² + B_V²).
Boundary Trap
Students frequently invert the ratio to tan δ = B_H / B_V, or confuse dip (a vertical-plane angle) with declination (a horizontal-plane angle).
Application Note
These component relations let a magnetometer convert a measured dip and one field component into the total terrestrial field.
🔬 VIRTUAL LAB Torque On Current Loop Magnetic Dipole
Full Stage ↗
? Quick Concept Check

At the magnetic equator, which statement about Earth's magnetic elements is correct?

Answer: δ = 0°, so B_V = 0 and B_E = B_H

02

The Earth's Magnetism — Numerical & Application

Using B_H = B_E cos δ gives cos δ = B_H / B_E = 0.35 / 0.70 = 0.5, so δ = cos⁻¹(0.5) = 60°.

Key Idea
cos δ = B_H / B_E, hence δ = cos⁻¹(B_H / B_E).
Boundary Trap
Writing B_E = B_H cos δ instead of B_E = B_H / cos δ, or using sin δ instead of cos δ when resolving the horizontal component.
Application Note
The same formula determines the dip whenever a magnetometer supplies both the total and the horizontal component.
🔬 VIRTUAL LAB Torque On Current Loop Magnetic Dipole
Full Stage ↗
? Quick Concept Check

At a place the angle of dip is 30° and the horizontal component of Earth's field is 0.4 G. The total magnetic field of Earth is:

Answer: 0.46 G

02

The Bar Magnet

2 concepts · Foundational
2 nodes
01

The Bar Magnet

No isolated magnetic monopole has ever been observed, so every field line closes on itself and the net magnetic flux through any closed surface is zero: ∮ B·dA = 0 (equivalently ∇·B = 0).

Key Idea
Gauss's law for magnetism: ∮ B·dA = 0 (∇·B = 0); magnetic field lines are continuous closed loops with no sources or sinks.
Boundary Trap
Students often assert magnetic monopoles exist or claim a nonzero flux through a closed surface; also confusing transverse and longitudinal cutting of a magnet (both halve the moment to M/2).
Application Note
This is why cutting a bar magnet always produces two smaller complete dipoles, never an isolated north or south pole.
🔬 VIRTUAL LAB Torque On Current Loop Magnetic Dipole
Full Stage ↗
? Quick Concept Check

A bar magnet of magnetic moment M is cut into two equal halves perpendicular to its axis. The magnetic moment of each half is:

Answer: M/2

02

The Bar Magnet — Numerical & Application

At equal distances B_axial = 2 B_eq, so B_eq = B_axial / 2 = 5 × 10⁻⁴ / 2 = 2.5 × 10⁻⁴ T.

Key Idea
For a short bar magnet at the same distance r, the axial field is twice the equatorial field: B_axial = 2 B_eq.
Boundary Trap
Forgetting the inverse-square-root dependence on B_H when dealing with oscillation, or using B_eq = 2 B_axial instead of B_axial = 2 B_eq.
Application Note
The 2 : 1 ratio provides a rapid cross-check when comparing measured dipole fields at the same distance.
🔬 VIRTUAL LAB Torque On Current Loop Magnetic Dipole
Full Stage ↗
? Quick Concept Check

The time period of oscillation of a small magnet in a magnetometer is T. If the horizontal component of Earth's magnetic field is increased four times, the new time period becomes:

Answer: T/2

03

Magnetisation And Magnetic Intensity

2 concepts · Foundational
2 nodes
01

Magnetisation And Magnetic Intensity

In a material the total flux density is B = μ₀(H + M). Magnetic intensity H and magnetisation M share the same dimensions [L⁻¹A] and SI unit (A/m), so they are added before multiplying by μ₀; B is in tesla.

Key Idea
B = μ₀(H + M); H and M have dimensions [L⁻¹A] and unit A/m, while B is in tesla.
Boundary Trap
Claiming H and M have different units, or writing B = μ₀(H + M) with H in tesla; keeping both H and M in A/m is essential.
Application Note
This relation is the starting point for computing the field inside a material once its magnetisation is known.
🔬 VIRTUAL LAB Torque On Current Loop Magnetic Dipole
Full Stage ↗
? Quick Concept Check

The magnetic susceptibility χ_m of a material is defined as:

Answer: χ_m = M / H (a dimensionless quantity)

02

Magnetisation And Magnetic Intensity — Numerical & Application

χ_m = M / H = 2000 / 5000 = 0.4.

Key Idea
χ_m = M / H (dimensionless).
Boundary Trap
Mishandling the power of ten, or adding χ_m to μ₀ instead of to 1 when converting to relative permeability.
Application Note
A small positive χ_m indicates a paramagnetic material, while a negative value would indicate diamagnetism.
🔬 VIRTUAL LAB Torque On Current Loop Magnetic Dipole
Full Stage ↗
? Quick Concept Check

A paramagnetic material has susceptibility 3 × 10⁻³. Its relative permeability μ_r is approximately:

Answer: 1.003

04

Magnetic Properties Of Materials

2 concepts · Foundational
2 nodes
01

Magnetic Properties Of Materials

Diamagnetic materials have χ < 0 and are weakly repelled, with susceptibility nearly independent of temperature; paramagnetic materials have small positive χ and follow Curie's law χ = C/T; ferromagnetic materials have χ ≫ 1 due to aligned domains.

Key Idea
χ < 0 → diamagnetic (repelled); 0 < χ ≪ 1 → paramagnetic (Curie's law χ = C/T); χ ≫ 1 → ferromagnetic (domain alignment).
Boundary Trap
Assigning the wrong sign to χ, or applying Curie's law to diamagnets (whose susceptibility is nearly temperature independent).
Application Note
The sign of χ predicts behaviour in a non-uniform field: diamagnets drift toward weaker field, paramagnets and ferromagnets toward stronger field.
🔬 VIRTUAL LAB Torque On Current Loop Magnetic Dipole
Full Stage ↗
? Quick Concept Check

According to Curie's law, the susceptibility of a paramagnetic material:

Answer: varies inversely with temperature (χ = C/T)

02

Magnetic Properties Of Materials — Numerical & Application

Retentivity B_r is the flux density remaining when H returns to zero; coercivity H_c is the reverse field required to bring B back to zero. The loop area equals the energy dissipated (hysteresis loss) per cycle per unit volume.

Key Idea
Retentivity B_r = B at H = 0; coercivity H_c = reverse field for B = 0; loop area = energy dissipated per cycle per unit volume.
Boundary Trap
Swapping the definitions of retentivity and coercivity; also, the loop area is energy LOSS, not stored or recoverable energy.
Application Note
These two parameters decide suitability for transformer cores (low H_c, narrow loop) versus permanent magnets (high H_c, broad loop).
🔬 VIRTUAL LAB Torque On Current Loop Magnetic Dipole
Full Stage ↗
? Quick Concept Check

The area enclosed by the B–H hysteresis loop represents:

Answer: the energy dissipated per unit volume per magnetisation cycle